- Portable & Packaged Chillers Air & Water Cooled
- >
- Thermal Care Industrial Process Portable & Packaged Chillers
- >
- Thermal Care Accuchiller EQ 1 TO 3 Ton Portable & Packaged Chillers
- >
- Thermal Care Accuchiller EQ2R03 3-Ton Remote Air-Cooled Condenser
Thermal Care Accuchiller EQ2R03 3-Ton Remote Air-Cooled Condenser
SKU:
EQ2R03
$12,900.00
$11,185.00
$11,185.00
On Sale
Unavailable
per item
The remote condenser is only available for use with 230/1/60 main power.
Accuchiller EQ Series Portable Industrial Chillers feature a compact footprint with an easily accessible interior and a microprocessor that provides precise temperature control and extensive diagnostics. Air-cooled, water-cooled and remote condenser models are packed with many standard innovative features that improve chiller performance and reliability.
Resources Center:
EQ Series Brochure: EQ Series Specifications: EQ Series Operations Manual: Pump Curves: Pump & Unit Options: 208,230 or 460V 3ph 60hz Standard 575V $11,350 1/4 hp n/a 1 hp Standard 2 hp $110 2 hp 2-stage $340 3 hp $175 5-Year compressor warranty $245 Pump & tank deduct ($300) |
Standard Features:
Direct-Drive Scroll Compressors Direct drive hermetically sealed scroll compressors with proven performance in industrial cooling for reliable, low maintenance, and efficient operation. Stainless Steel Evaporators High-efficiency stainless steel plates with copper brazing provide maximum performance, long life, and an enhanced level of corrosion protection for harsh process conditions. Stainless Steel Pump Stainless steel pump selected for peak performance with the utmost in corrosion protection to ensure a long useful life under severe industrial conditions. Nonferrous Reservoir and Water Lines The insulated reservoir, fluid lines, pumps, and other components in the process fluid circuit will remain free of rust to provide maximum corrosion protection. Evaporator Inlet Strainer The evaporator inlet strainer removes any debris present in the process fluid to prevent costly downtime and repair due to a clogged chiller evaporator. Compressor Protection Technology Our compressor protection technology uses start-to-start anti-recycle control logic to limit cycling under low-load operating conditions to extend compressor life. Temperature Deviation Warnings and Alarms A warning alerts the operator of a potential problem before a fault occurs and if the condition gets worse, an alarm stops the chiller to prevent damage. Deviation Alarm Time Delays Provides an adjustable alarm time delay to deactivate the alarms long enough for the process loop to stabilize before the alarms are active. |
Available Options:
• Larger pumps • Alarm horn • Automatic make-up • Rotary non-fused disconnect switch • Branch circuit fusing • C-UL508A industrial control panel • Modbus TCP/IP communications • High temperature set point (up to 80°F) • Reservoir low level alarm • Main power phase monitor and alarm • Return fluid temperature display EQ Series Options & Cost:
3-phase monitor $260 Alarm horn $165 Automatic water make-up valve (installed at the factory at the time of unit production) $395 Branch circuit fusing (included in C-UL508A option) $275 C-UL508A control panel (adds branch circuit fusing and other components needed to meet C-UL508A standards) $515 Extended setpoint range (adds CPR valve to extend maximum set point from 65°F to 80°F) $250 Modus TCP/IP communications (in place of standard Modbus RTU) $335 Remote controller with 50 foot cable (second control interface for remote mounting) $365 Remote setpoint (0 to 10VDC or 4 to 20 mA) $200 Reservoir low level alarm $210 Return water temperature display $85 Rotary non-fused disconnect $330 Special color air-dry enamel paint $1,185 Ship Loose Options: Part #9638518 Automatic water make-up retrofit kit $395 Part #9638326 Return piping kit $395 |