Rental Temporary ELECTRIC Heaters• Finned tubular heating elements
• Thermostat adjustment 40° to 100° F • Two 10” rear wheels - front locking caster on 45 kw unit • High-limit thermal cutout switch with reset • Magnetic contactor • Fan only operation • Safety yellow heater enclosure with safety screens on both air intake and output openings • Optional 25' long SO type cord, ready for plug attachment is available for each model |
|
RENT NOW Fostoria FES-1024-1CA
FES-1024-1CA
KW BTU's VOLTS PH AMPS CFM TEMP Rise 10 34,130 240 1 42 800 45 °F PORTABLE INDOOR ELECTRIC HEATING - WITH - NO OPEN FLAMES NO DEADLY FUMES TO VENT NO “OUT OF FUEL” SHUT-DOWNS Download Product Specifications Page Download Product Manual |
Chromalox SDRA-60-93RG Rental Grade Portable Blower Heater 60.0KW 204,780 Btu/Hr 600V 3PH 58.9A PCN 295793
The SDRA-RG series of SuperDragons have the same features as the standard industrial grade units except that they feature a welded aluminum frame for light weight and can be stacked two high to reduce floor space during storage or transportation to various venues. The rental grade units feature 4” diameter casters, two of which lock.
Applications: - Aircraft Cabin Heating - Plant Maintenance - Construction Sites - Curing Plaster And Concrete - Warming Workers - Drying Out After Floods - Insect Control - Thawing Frozen Pipes For best results, use in an enclosed area with ceiling heights below 15 feet. |
Advantages:
- No Fumes Or Annoying Smell - Safer, No Open Flame - Safe To Operate In Unattended Areas - No Moisture And Fumes Added To The Air - Burning Oil And Gas Fuels Adds Moisture And Fumes To The Air - Minimum Maintenance - No Fuel To Store - Long Horizontal Air Throw - Easy Installation - Fan Only For Summer Cooling - Long Life Industrial Finned Tubular Heating Elements - High Limit Thermal Cut-out Switch |
HACS Air Temperature Control - Electric Heating System 50, 100 & 150 kW Capacity
![]()
|
Chromalox Air Temperature Control Systems
provide durable, accurate temperature control for large capacity temporary heating applications. Welded steel construction, tubular elements, and industrial fan offer superior durability and performance under heavy usage and rough environments. Applications • Temporary on-site comfort heat for large capacity special events. • Interim comfort heating system during commercial construction prior to permanent HVAC installation. • Curing plaster and drying of paint in commercial construction. • Spot heating for personnel and freeze protection for equipment in the event of a plant shutdown. |
Advantages:
• Portable, Forced Air Temperature Control System • 50, 100, and 150 kW Heating Capacity • 480 V, 3 Phase, 60 Hz • Corrosion Resistant Painted Steel Construction • Heavy Duty 0.475” Dia. INCOLOY® Sheath Tubular Elements • 3,000 – 7,000 SCFM of Airflow from Industrial-Grade Fans • Multi-stage Contactor System for Accurate Temperature Control • NEMA 4 Electrical Enclosure for Outdoor Weather Protection • Fork Lift Accessible • Four-Point Lug Lifting System • Use with Standard 20” Flexible Duct • Stackable to Maximize Storage • Emergency Stop Button and Fan Delay on Shutdown • Optional SCR Power Control System for High Accuracy |