We sell electric heaters for construction, event and temporary heat solutions 

Patron Electric Heaters 
Space Shop Heater

​THE SAFEST AND MOST RELIABLE ELECTRIC HEATERS IN NORTH AMERICA 

Milk House Heaters 
Space Office Heater

Milk house heater/fan features two heat settings. Plus, it includes an adjustable thermostat. Enjoy warmth and comfort with this convenient heater.

TPI Fostoria Construction 
Portable Heaters

 TPI Corporation has been known as America's Comfort Conditioning Company. Today - as a U.S. based privately held manufacturer ​

TPI Fostoria Indoor 
Portable Heaters

FSP-series is a line of heavy-duty portable heaters designed to provide electric infrared heat when permanently installed heaters are not practical or economical

---

Chromalox DRA 
Salamander Heater

​For Best Results Use in Enclosed Area with Ceiling Heights Below 15'
Any Commercial or Industrial Application Needing Instant Fan Forced Heat
Building Construction
Curing Plaster and Concrete

Fostoria Wall Ceiling 
Mounted Heaters

Long-life finned tubular heating elements. 
Thermostat adjustment 40F to 100F. 
High-limit thermal cutout switch. Fan only switch. 
Includes both wall and ceiling mounting brackets.

BERKO Portable Spot 
Industrial Salamander Heater

The brightly painted heater enclosure is a structural frame consisting of two spun rings and two formed channels that support a 20 gauge steel cylinder. The enclosure is phosphate coated for corrosion resistance, and finished in powder coat paint. 

---

Temporary Spot Electric Heaters  5100 series

MARKEL Taskmaster Unit Heaters - Vertical Mount and Horizontal Mount Units  (50-500,000 BTU/HR) (15 kw - 150 kW High Heat) 

• Draw Through Design - for efficient air circulation and even air pattern across elements.
• Fan Over-Ride - purges heater of residual heat after shutdown.
• Conforms to OSHA and NEC - when installed according to instructions.
• Wide Range of Accessories - temperature / air control and air diffusion options.
• Two Stage Operation - on 25-50 kW models.
• Dye Formed Heavy Gauge Steele Case
• Outlet Louvers - adjustable from 30 up to 45 degree angle.
  
• Motors - 25KW up; two speed, totally enclosed, permanent split capacitor with 10 years lubrication.
  
• Contractors - heavy duty type factory installed and wired where required.
• Fusing - circuit subdivision, motor and transformer fusing factory installed where required.
• Element - high mass all steel spiral finned element.
• Transformer - 24 volt control transformer where required.
• Thermal Overload - automatic reset disconnects motor and element in the event normal operation temperatures are exceeded.
• Master Terminal Board - for easy wiring of all control options.
• Capabilities - 25 thru 50 kW, 34"H x 29.25"W x 10.0625"D (50 kW - 480V 3 Phase; 60.1 amps)
• U.L. Listed and CSA Certified

 Markel Taskmaster Unit Heater 

Unit heaters should be used in low bay areas and placed along outside walls, spaced and directed to set up generally circular air movement.

markel_at50kw.pdf
File Size:	88 kb
File Type:	pdf

Download File

---

VERTICAL MOUNT 

Down-blow unit heaters are recommended for use
in high bay areas or in spaces where extended heat
distribution using a minimal number of heaters is
desired. A wide selection of accessory diffusers is
available to establish air patterns and distribution to
meet almost any requirement.

​Fostoria® Sun-Mite® Portable Electric Indoor (Salamander) Heat Wave Heater 

​FES Series Heat Wave
Shipping weight 51 to 72 lbs.
"Safety Yellow" and Black Finish
39:H by 23.25"W by 22"D
Can be left unattended
Built-in safety features
Variable Thermostat
Hi-Temperature Cut-Out Switch with an Auto-reset
Powered by electricity
Thermostat adjusts from 40° to 100° F
All units can be switched to fan-only operation
Safety screen cover each end of the heat drum
Long-life finned tubular heating aliments
Long-life motor and fan assembly
Magnetic contactor
Input terminal power block

ELECTRIC HEATERS			ELECTRICAL	DIMENSIONS IN FEET			WEIGHTS
SIZE	OBTAINABLE TEMPERATURES	FLOW	Rated Line Amps 480v/600v	Length	Width	Height	(lb.)
20kW	100º-185ºF+	N/A	60 @ 208v only	22"	22"	28"	93
60kW	100º-300ºF+	1,500-3,500 CFM	58/47	72"	42"	53"	1,480
100kW	100º-500ºF+	3,500-7,500 CFM	120/74	97"	50"	57"	1,920
150kW	100º-300ºF+	4,500-10,000 CFM	165/130	101"	52"	96"	2,160