​Rental Temporary Power Distribution Boxes & Cabling

POWER DISTRIBUTION BOXES & CABLING

---

Ameritemp offers a full line of state of the art power distribution equipment such as transformers, panels, spider boxes, adjustable breaker boxes, breakout boxes and event standard power cables designed specifically for use in the Rental/Special Event industry. Our professional and highly trained event technicians are experts in providing top-notch power distribution rental service for our rental/event clients. 
When it comes to power distribution rental, you want to be certain you’re partnering with a trusted company. The very success of your event depends on the vendor you choose.
For years, Ameritemp has been the preferred provider of power distribution equipment because we offer:

• Complete temporary power solutions—We offer all the power distribution equipment you need to get your event up and running. Ameritemp's power distribution rentals include transformers, panels, spider boxes, adjustable breaker boxes, breakout boxes and rental/event standard power cables designed specifically for use in the rental/special event industry.
• Experience & expertise—Since 1995, Ameritemp has been the preferred provider of power distribution equipment for many large projects and events in the United States. Our professional technicians are experts in the equipment we provide, and we know exactly what it takes to power your rental/event.
• High-end equipment—Ameritemp is known for providing customers with the finest, state-of-the-art equipment in the business. We take great pride in our work, and we want to make sure you get the best power distribution equipment available for your rental/event.
• Personal service—Excellent customer service is our calling card. We’ve built an elite reputation for our incredible attention to detail. We understand the importance of not only making sure our power distribution equipment works properly, but that it also looks good at your rental/event.

​6506GU Temporary Spider Box 50A 125/250V 6 OUTLET GFCI UG

Input- 50A 125V/250V (CS6375)
Output-50A 125V/250V (CS6369) Feedthrough
6-20A 125V (5-20R)
1-30A 250V (L6-30R)

​Power Inlet: CS6375
Power Outlet: CS6369
Receptacles: 1 ea. L6-30R, 6ea. 5-20R GFCI
Feed-Through: Yes
GFCI: Yes
3R Rated: Yes
Weight: 29lbs

​50A-TWIST-LOCK CABLES:
Length: 25, 50 & 100'
Guage: 6/4
Insulation: EP Rubber
Conductor Count: Single
Max Amps: 50
Max Voltage 600V AC

12/3 AWG  Extension Cord:
25, 50 & 100'
SJTW, 12/3 AWG
5-15 plug; 5-15 receptacle
15 amp; 1875 watts

6606GUSF-254 3Ph to 1Ph Temporary Power Distribution Spider Box 

​CEP’s heavy duty rugged specialty boxes are UL/cUL to UL 1640 and may be custom configured to meet the needs of specific user applications. The items below are commonly ordered products. Please contact us for any modifications required. These boxes are available in either stainless steel or powder coated steel with Legs or Wrap- Around Frame. Add “S” for stainless steel or “F” for Wrap-Around Frame to the part number.

• Input -200A Cam-Type
• Output 4 &6–50A 125/250V (CS6369)
• Weight: 39 lbs​
  

​SERIES 16 CAM LOCK CABLES:
Length: 10, 25-50'
Guage: 4/0
Insulation: Double Type-W
Conductor Count: Single/Multiple
Max Amps: 400A
Max Voltage: 600 V

​​50A-TWIST-LOCK CABLES:
Length: 25, 50 & 100'
Guage: 6/4
Insulation: EP Rubber
Conductor Count: Single
Max Amps: 50
Max Voltage 600V AC

6212DC 100A 3 Phase Distribution Cart D-Wire w/CAM Tails Input 4-CS6369, 2-5-20R

This CEP Distribution Panel allow for safe transition from large generators or to power tools at the job site. Volts 120/208, OSHA Approved Yes, Application Transition 3-phase to single-phase, Dimensions L x W x H in. 34 x 50 x 36, Amps 100, UL Listed Yes. 100 Amp 125/208V main breaker Secondary power with 4-cs6369 outlets and 2 NEMA 5-20R breaker-protected outlets. NEMA 3R enclosure, Clear breaker panel window, Heavy duty cart
Direct wire, pin/sleeve, cam type devices, Stainless Steel 16ga enclosures
3R in use receptacle covers, Lifting Rings
CABLE NOT INCLUDED

SERIES 16 CAM LOCK CABLES:
Length: 10, 25-50'
Guage: 4/0
Insulation: Double Type-W
Conductor Count: Single/Multiple
Max Amps: 400A
Max Voltage: 600 V

​QUAD BOX STRINGERS & Extensions
​10/5 SOOW, 20A rated with M/F NEMA L21-20
Each stringer consists of 3 rubber boxes.
Each box is run on its own independent circuit, L1, L2 and L3

6220CC 200A 3 Phase Distribution Cart Cam Type Input 2-5-20R, 8-CS6369 

The CEP temporary power electrical distribution cart is made of heavy gauge tube steel and provides an easy means of transportation as well as protection for the enclosure. The enclosure is custom built from 16 gauge stainless steel sheet metal. 100A, 200A, 400A and special configurations are available upon request.
100/200/400 amp 120/208V

• NEMA 3R enclosure.
• Clear Breaker panel window.
• Easily stackable heavy duty cart.
• Cam type devices.
• Stainless Steel 16ga. Enclosures.
• 3R in use receptacle covers.
• Lifting Rings.

​SERIES 16 CAM LOCK CABLES:
Length: 10, 25-50'
Guage: 4/0
Insulation: Double Type-W
Conductor Count: Single/Multiple
Max Amps: 400A
Max Voltage: 600 V

​​50A-TWIST-LOCK CABLES:
Length: 25, 50 & 100'
Guage: 6/4
Insulation: EP Rubber
Conductor Count: Single
Max Amps: 50
Max Voltage 600V AC

400A Mini I-Line Panel

400A 600VAC Portable I-Line temporary power electrical distribution Panel:

• 0.090" aluminum enclosure, NEMA 3R powder coated RAL7035
• Stainless steel frame with forklift pockets and lifting eyelets
• Two 10" never flat casters
• 400A 600VAC 3P-5W, 27" spacing I-Line interior
• Two sets of Male 400A 16 series Camlok Input with snap covers
• Four removable gland plates
• Large clear polycarbonate window
• Pad-lockable door with four 1/4 turn latches 
• Bottom access trap door (hardwire out access).

​​SERIES 16 CAM LOCK CABLES:
Length: 10, 25-50'
Guage: 4/0
Insulation: Double Type-W
Conductor Count: Single/Multiple
Max Amps: 400A
Max Voltage: 600 V

600Amp Breakout Panel

• AMPERAGE RANGE: 200A – 600A
• VOLTAGE OPTIONS: 120/240V, 120/240V Delta, 208Y/120V, 480V, 480Y/277V, 600V
• INPUT OPTIONS: 16 series male panel mounts, cord grip, and more
• OUTPUT OPTIONS: 50A California-style receptacle, 16 series female panel mounts, cord grip, GFCI receptacle, duplex receptacle, NEMA L5-30 receptacle, NEMA L6-30 receptacle, NEMA L14-30 receptacle, 30A RV receptacle, 50A RV receptacle, and more
• OTHER FEATURES: UL 50 Listed, UL 1640 Listed and/or C-ETL/ETL 1640 Listed, NEMA 3R or NEMA 4X, all aluminum construction or all stainless steel construction, heavy duty tilt and roll cage with wheels, custom powder coat, custom UV-printed graphics, made in USA

600A Mini I-Line Panel

Download 600AIL Specifications

600A 600VAC Portable I-Line temporary power electrical distribution Panel:

• 0.090" aluminum enclosure, NEMA 3R powder coated RAL7035
• Stainless steel frame with forklift pockets and lifting eyelets
• Two 10" never flat casters
• 600A 600VAC 3P-5W, 27" spacing I-Line interior
• Two sets of Male 400A 16 series Camlok Input with snap covers
• Four removable gland plates
• Large clear polycarbonate window
• Pad-lockable door with four 1/4 turn latches 
• Bottom access trap door (hardwire out access).

​​SERIES 16 CAM LOCK CABLES:
Length: 10, 25-50'
Guage: 4/0
Insulation: Double Type-W
Conductor Count: Single/Multiple
Max Amps: 400A
Max Voltage: 600 V

800A I-Line Temporary Power Electrical Distribution Panel

Download 800AIL Specifications

800A 600VAC Portable I-Line Panel:

• 0.090" aluminum enclosure, NEMA 3R powder coated RAL7035
• Carbon steel frame with forklift pockets and lifting eyelets
• 800A 600VAC 3P-5W, 45" spacing I-Line interior
• 800A - 27" or 45" depending on the model
• ​Four sets of Male 400A 16 series Camlok Input with snap covers
• Four large removable gland plates
• Two small removable gland plates
• Large clear polycarbonate window
• Pad-lockable door with four 1/4 turn latches 
• Bottom access trap door (hardwire out access)

​SERIES 16 CAM LOCK CABLES:
Length: 10, 25-50'
Guage: 4/0
Insulation: Double Type-W
Conductor Count: Single/Multiple
Max Amps: 400A
Max Voltage: 600 V

1200A I-Line Temporary Power Electrical Distribution Panel

Download 1200AIL Specification

1200A 600VAC Portable I-Line Panel:

• 0.090" aluminum enclosure, NEMA 3R powder coated RAL7035
• Carbon steel frame with forklift pockets and lifting eyelets
• 1200A 600VAC 3P-5W, 45" spacing I-Line interior
• 1200A - 63" (31.5" Wide Side, 31.5" Narrow Side)
• ​Four sets of Male 400A 16 series Camlok Input with snap covers
• Four large removable gland plates
• Two small removable gland plates
• Large clear polycarbonate window
• Pad-lockable door with four 1/4 turn latches 
• Bottom access trap door (hardwire out access)

​​SERIES 16 CAM LOCK CABLES:
Length: 10, 25-50'
Guage: 4/0
Insulation: Double Type-W
Conductor Count: Single/Multiple
Max Amps: 400A
Max Voltage: 600 V

Adjustable I-Line Breakers for 400A, 600A, 800A & 1200A Panels

Common Gland Plates Used

15 KVA Skid Style

15 KVA Skid type configuration:

• 25ft section of #6/4C SOOW multiple-conductor cable, hardwired to the primary voltage side.
• 35A 600V/OFF/480V rotary voltage selector switch located on the primary side.
• 60A 3P 240V 80% rated Main breaker on the secondary side.
• 200A 3Ø-5W Square-D QO load center to distribute 120/208V with:

            -8x 20A 125V GFCI Duplex receptacle with metal outdoor rated covers.
            -2x 30A 250V NEMA L6-30 twist-lock receptacle with lexan covers.

• Aluminum NEMA 3R enclosure with bottom access trap door (hardwire out access) .

​30 KVA Skid Type

30 KVA Skid type configuration:

• 400A 16 Series Camlok input/ output with color coded snap back covers. 
• 40A 600V/OFF/480V rotary voltage selector switch located on the primary side.
• 40A 3P 600VAC Main breaker on the Primary side.
• 80A 3P 240V 80% rated Main breaker on the secondary side.
• 200A 3Ø-5W Square-D QO load center to distribute 120/208V with:

          -8x 20A 125V GFCI Duplex receptacle with metal outdoor rated covers.
          -2x 30A 250V NEMA L6-30 twist-lock receptacle with lexan covers.
          -2X 50A 125/250V CS6369 twist-lock receptacle with lexan covers.

• Aluminum NEMA 3R enclosure with bottom access trap door (hardwire out access).
• Heavy duty carbon steel frame with forklift pockets and lifting eyelets.
• Never flat urethane casters with locks.
• 60A 600VAC 3W-4P AR642 "Welder" Pin & Sleeve receptacle with branch breaker.​

​45 KVA Skid Type

45 KVA Skid type configuration:

• 400A 16 Series Camlok input/ output with color coded snap back covers. 
• 40A 600V/OFF/480V rotary voltage selector switch located on the primary side.
• 40A 3P 600VAC Main breaker on the Primary side.
• 125A 3P 240V 80% rated Main breaker on the secondary side.
• 200A 3Ø-5W Square-D QO load center to distribute 120/208V with:

          -8x 20A 125V GFCI Duplex receptacle with metal outdoor rated covers
          -2x 30A 250V NEMA L6-30 twist-lock receptacle with lexan covers
          -2X 50A 125/250V CS6369 twist-lock receptacle with lexan covers

• Aluminum NEMA 3R enclosure with bottom access trap door (hardwire out access).
• Heavy duty carbon steel frame with forklift pockets and lifting eyelets.
• Never flat urethane casters with locks.
• 60A 600VAC 3W-4P AR642 "Welder" Pin & Sleeve receptacle with branch breaker.​

75 KVA Skid Type

75 KVA Skid type configuration:

• 400A 16 Series Camlok input/ output with color coded snap back covers 
• 600V/OFF/480V rotary voltage selector switch located on the primary side
• 90A 3P 600VAC Main breaker on the Primary side
• 200A 3P 240V 100% rated Main breaker on the secondary side
• 200A 3Ø-5W Square-D QO load center to distribute 120/208V with:

         -10x 20A 125V GFCI Duplex receptacle with metal outdoor rated covers
         -2x 30A 250V NEMA L6-30 twist-lock receptacle with lexan covers
         -2X 50A 125/250V CS6369 twist-lock receptacle with lexan covers

• Aluminum NEMA 3R enclosure with bottom access trap door (hardwire out access)
• Heavy duty carbon steel frame with forklift pockets and lifting eyelets
• Never flat urethane casters with locks

112.5 KVA Skid Type

112.5 KVA Skid type configuration:

• 400A 16 Series Camlok input/ output with color coded snap back covers. 
• 600V/OFF/480V rotary voltage selector switch located on the primary side.
• 150A 3P 600VAC Main breaker on the Primary side.
• 400A 3P 240V 100% rated Main breaker on the secondary side.
• 200A 3Ø-5W Square-D QO load center to distribute 120/208V with:

          -10x 20A 125V GFCI Duplex receptacle with metal outdoor rated covers.
          -2x 30A 250V NEMA L6-30 twist-lock receptacle with lexan covers.
          -2X 50A 125/250V CS6369 twist-lock receptacle with lexan covers.

• Aluminum NEMA 3R enclosure with bottom access trap door (hardwire out access).
• Heavy duty carbon steel frame with forklift pockets and lifting eyelets.
• Never flat urethane casters with locks.

150 KVA Skid Type

150 KVA Skid type configuration:

• 400A 16 Series Camlok input/ output with color coded snap back covers. 
• 600V/OFF/480V rotary voltage selector switch located on the primary side.
• 175A 3P 600VAC Main breaker on the Primary side.
• 400A 3P 240V 100% rated Main breaker on the secondary side.
• 200A 3Ø-5W Square-D QO load center to distribute 120/208V with:

          -10x 20A 125V GFCI Duplex receptacle with metal outdoor rated covers.
          -2x 30A 250V NEMA L6-30 twist-lock receptacle with lexan covers.
          -2X 50A 125/250V CS6369 twist-lock receptacle with lexan covers.

• Aluminum NEMA 3R enclosure with bottom access trap door (hardwire out access).
• Heavy duty carbon steel frame with forklift pockets and lifting eyelets.
• Never flat urethane casters with locks.

​225 KVA Skid Type

225 KVA Skid type configuration:

• 400A 16 Series Camlok input/ output with color coded snap back covers. 
• Re-connectable primary input voltage (600VAC or 480VAC).
• 275A 3P 600VAC 80% rated Main breaker on the Primary side.
• 625A 3P 240V 100% rated Main breaker on the secondary side.
• 1200A 45" Interior I-Line Panel to distribute primary or secondary (optional).
• Aluminum NEMA 3R enclosure with bottom access trap door (hardwire out access).
• Heavy duty carbon steel frame with forklift pockets and lifting eyelets.
• Never flat urethane casters with locks.

Overall dimensions*:
83.25"H x 80.50" L x 55.125" W (Approximate 3000lbs)
*All measurements are approximate and for estimation purposes only.
Specifications & Standards:

• UL1640 Portable Distribution Panel.
• CAN/CSA C22.2 No.14 (Canada listed).

300 KVA Skid Type

300 KVA Skid type configuration:

• 400A 16 Series Camlok input/ output with color coded snap back covers. 
• Re-connectable primary input voltage (600VAC or 480VAC).
• 400A 3P 600VAC Main breaker on the Primary side.
• 800A 3P 240V 100% rated Main breaker on the secondary side.
• 1200A 45" Interior I-Line Panel to distribute primary or secondary (optional).
• Aluminum NEMA 3R enclosure with bottom access trap door (hardwire out access).
• Heavy duty carbon steel frame with forklift pockets and lifting eyelets.
• Never flat urethane casters with locks.

Overall dimensions*:
83.25"H x 80.50" L x 55.125" W (Approximate 3205lbs)
*All measurements are approximate and for estimation purposes only. 
Specifications & Standards:

• UL1640 Portable Distribution Panel
• CAN/CSA C22.2 No.14 (Canada listed)

500 KVA Skid Type

500 KVA Skid type configuration:

• 400A 16 Series Camlok input/ output with color coded snap back covers. 
• Re-connectable primary input voltage (600VAC or 480VAC).
• 600A 3P 600VAC Main breaker on the Primary side.
• 1200A 3P 240V 100% rated Main breaker on the secondary side.
• 1200A 45" Interior I-Line Panel to distribute primary or secondary (optional).
• Aluminum NEMA 3R enclosure with bottom access trap door (hardwire out access).
• Heavy duty carbon steel frame with forklift pockets and lifting eyelets.
• Never flat urethane casters with locks.

Overall dimensions*:
83.25"H x 80.50" L x 55.125" W (Approximate 3205lbs)
*All measurements are approximate and for estimation purposes only. 
Specifications & Standards:

• UL1640 Portable Distribution Panel
• CAN/CSA C22.2 No.14 (Canada listed)