FSS Series Heavy Duty Flat Panel Emitter Electric Overhead Infrared Heater
|
The Fostoria FSS-Series heaters provide safe, efficient electric infrared heat for total area heating or spot heating applications for warehouses, steel mills, machine shops and many other industrial applications They are ideal for use in high vibration environments. Using the “L” brackets on the top of the housing these overhead heaters can be hung by chain or rigidly mounted They operate cleanly, emitting no fumes or odors.
Applications where combustible materials and/or personnel will be located near these heaters must adhere to the minimum clearance information. DO NOT install closer than 36 inches to a vertical surface or 24 inches to a ceiling. Heaters MUST BE SEPARATED by more than 36 inches and 72 inches from any combustible surface in direct radiation path (87 inches for FSS-95 Series). 1 Year Limited Warranty. • ETL listed for suspended, high-bay indoor applications (see table on next page) • High-watt-density radiant heat with 60 degree heat pattern. • Gold-anodized aluminum housing for good reflectivity and corrosion resistance • “L-brackets included for chain suspension or rigid-mounting. • Designed for direct-wire, single or three-phase configurations (see table next page). |
|
Average Minutes to Achieve Temperaute Rise*
|
Building Size:
|
1000 SQ Feet
|
1500 SQ Feet
|
2000 SQ Feet
|
Value |
Temp Rise |
Temp Rise |
Temp Rise |
Temp Rise |
Temp Rise |
Temp Rise |
Heater: |
20F |
40F |
20F |
40F |
20F |
40F |
10 KW |
70 min |
140 min |
105 min |
210 min |
--- |
--- |
15 KW |
47 min |
94 min |
71 min |
142 min |
94 min |
188 min |
30 KW |
23 min |
46 min |
35 min |
70 min |
47 min |
94 min |
45 KW |
10 min |
30 min |
20 min |
35 min |
35 min |
40 min |
* Based on a 15' ceiling height - lower ceiling height will reduce time required
*Note: Free UPS Ground shipping to the 48 United States.
