The Tempest, DRIEAZ & AMERIC CORPORATION
This two speed air mover is conveniently small and extremely lightweight yet powerful enough to create air flow beyond your expectations. It has been engineered to be durable, long lasting, high performing and has been rigorously tested for heavy duty use.
|
|
XPOWER X-3400A 1/2 HP 600 CFM 2.8 Amps Variable Speed Control 3-Stage Professional Air Scrubber
$1,245.00
$899.00
Sold out
The XPOWER X-3400A 3-Stage Air Scrubber is a commercial purification system featuring a powerful external rotor induction motor that produces 600 CFM with less than a 3.0 amp power draw. Developed to restore indoor air quality at a variety of job sites, the X-3400A with HEPA filter effectively removes contaminants such as bacteria, allergens, mold and sub-micron sized dust with its advanced 3 stage filtration technology. The 1st stage nylon mesh filter is washable and prolongs the life of the two inner filters. The 2nd pleated media filter removes additional impurities, and the 2” thick HEPA filter is capable of capturing 0.3 sized microns at a 99.97% rate as well as smaller and larger particulate matter at an even greater rate. A convenient indicator light notifies you when the HEPA filter needs replacement.
The X-3400A features a variable speed control switch and built-in daisy chainable power outlet. Stackable and lightweight for easy transport, the attached fitted foam cap functions to contain contaminants. It's unique, compact size and lightweight design is ideal for both water damage restoration and construction jobs. An optional Activated Carbon Filter is available to effectively neutralize smoke and other noxious odors present in the environment
X-3700 1/3 HP 550 CFM 2.3 Amps Variable Speed Control Air Scrubber with 4-Filter Stage System
$1,199.00
$999.00
Sold out
The XPOWER X-3700 4-Stage Air Scrubber is a commercial purification system featuring a powerful external rotor induction motor that produces 550 CFM while drawing only 2.3 amps. This unit is ideal for creating a clean and healthy environment in locations such as doctor's offices, medical facilities, and other workplaces. Featuring whisper quiet performance and a fully adjustable variable speed control dial; this unit can clean areas up to 1500 sq. ft.
The X-3700 with HEPA filter effectively removes contaminants such as bacteria, allergens, mold and sub-micron sized dust with its advanced 4 stage filtration technology. The 1st stage nylon mesh filter is washable and prolongs the life of the three inner filters. The 2nd pleated media filter removes additional impurities, the 3rd two pound carbon filter neutralizes odor, and the last 2” thick HEPA filter is capable of capturing 0.3 sized microns at a 99.97% rate. A convenient indicator light notifies you when the HEPA filter needs replacement.
The X-3700 with HEPA filter effectively removes contaminants such as bacteria, allergens, mold and sub-micron sized dust with its advanced 4 stage filtration technology. The 1st stage nylon mesh filter is washable and prolongs the life of the three inner filters. The 2nd pleated media filter removes additional impurities, the 3rd two pound carbon filter neutralizes odor, and the last 2” thick HEPA filter is capable of capturing 0.3 sized microns at a 99.97% rate. A convenient indicator light notifies you when the HEPA filter needs replacement.
XPOWER X-2480A Professional 3-Stage HEPA Mini Air Scrubber
$839.00
$699.00
Small but mighty, the new XPOWER X-2480A achieves professional grade air purification in a super portable compact footprint. Featuring a powerful 1/2 HP external rotor induction motor, this 3 stage commercial purification system produces 550 CFM with less than a 3.0 amp draw. Developed to restore indoor air quality at a variety of job sites—the X-2480A with HEPA filter effectively removes contaminants such as bacteria, allergens, mold and sub-micron sized dust with its advanced 3 stage filtration technology. The 1st stage washable and reusable nylon mesh filter extends the life of the primary filters. The 2nd stage pleated media filter removes additional impurities, and the true HEPA filter captures 0.3 sized and larger microns at a 99.97% rate. A convenient indicator light notifies you when filters need cleaning or replacement.
XPOWER X-2580 Professional 4-Stage HEPA Mini Air Scrubber
$839.00
$699.00
Small in size, but not compromising on airflow, the new XPOWER X-2580 commercial grade air scrubber features a 1/2 HP motor which generates up to 550 CFM. This unit's FOUR STAGES OF FILTRATION include a carbon filter for effective odor control. The two outermost nylon mesh filters capture 90% of medium to large contaminants and can easily be removed and hand washed. The 3rd stage activated carbon filter effectively absorbs and neutralizes a wide range of odors and other pollutants. The final stage HEPA filter removes 99.97% of 0.3-micron sized particulates as well as other particulate sizes including bacteria, allergens, and sub-micron sized dust. A convenient indicator light notifies you when the filters need to be cleaned or replaced.
The X-2580’s five speed control switch gives you the flexibility to run the unit on a quiet low speed in noise sensitive environments. A lipped air outlet can be easily ducted to channel purified air or create negative air pressure. Stack able and lightweight for easy transport, the rugged X-2580 is ideal for even the toughest water damage restoration and construction jobs.
The X-2580’s five speed control switch gives you the flexibility to run the unit on a quiet low speed in noise sensitive environments. A lipped air outlet can be easily ducted to channel purified air or create negative air pressure. Stack able and lightweight for easy transport, the rugged X-2580 is ideal for even the toughest water damage restoration and construction jobs.
XPOWER X-3500 Professional 4-Stage HEPA Air Scrubber
$899.00
$849.00
Sold out
The XPOWER X-3500 Air Scrubber is a commercial grade air filtration system with Four Stages of Filtration to promote a healthy grooming environment cleaned of harmful airborne contaminants such as hair, dander, pet allergens, mold, and bacteria. The two outermost nylon mesh filters capture 90% of medium to large contaminants such as hair and can easily be removed and hand washed. The 3rd stage of filtration is composed of activated carbon which effectively absorbs and neutralizes a wide range of odors and other pollutants. The final stage of filtration is a 1.4 inch. thick HEPA filter which filters out 99.97% of 0.3-micron sized particulates as well as other particulate sizes including bacteria, allergens, and sub-micron sized dust. A convenient indicator light notifies you when the HEPA filter needs replacement.
XPOWER AP-2000 Portable HEPA Air Filtration System
$1,209.00
$949.00
The XPOWER AP-2000 Portable HEPA Air Filtration System provides high volume air exchanges required in abatement, dust control, and air scrubbing on large job sites contaminated by airborne pollutants. While drawing ONLY 8.5 AMPS, this lightweight Portable HEPA Air Scrubber produces an incredible 2000 CFM of air movement to efficiently remediate large spaces such as: hospitals, schools, arenas, gyms, conference halls, hotels, and any other largely occupied areas.
Moving the AP-2000 is made easy as it includes a 4 caster system (assembly required). The 2 stationary and 2 swiveling casters allow for easy horizontal maneuverability through any standard doorway. The durable polyethylene roto-molded housing features 4 integrated carrying handles, a strap tie down point, with nested stacking that secures the casters during the transport of multiple stacked units.
XPOWER P-80A Mighty Air Mover
$69.00
$59.00
Ventilate and dry like a Pro at a fraction of the cost! The P-80A mini air mover blasts up to 475 CFM with its efficient 138 watts motor. Drawing only 1.2 Amps at its highest speed setting, this multipurpose air mover is a must have addition for home or garage.
Manufactured with rugged state-of-the-art injection mold technology, this air mover is ideal for drying tight crawl spaces, beneath kitchen counters, inside cabinets, bathrooms, auto interiors, and more. The P-80A features a three speed switch for full airflow control and a set of on board power outlets that allow you to link multiple units together. Designed for easy storage and portability, the P-80A’s stackable design features convenient wraparound cord storage and weighs less than 10 pounds.
XPOWER P-100A Compact Air Mover with Daisy Chain
$83.00
$69.00
Experience powerful performance in an ultra compact design! The XPOWER P-100A offers up to 500 CFM with its efficient 1/8 HP motor. Drawing only 1.5 Amps at its highest speed, this multipurpose air mover is a household must have! Dry and ventilate like a pro with the P-100's wide pattern of airflow.
Manufactured with rugged state-of-the-art injection mold technology, this air mover is ideal for drying tight areas such as crawl spaces, under counters, inside cabinets, bathrooms, auto interiors, and more. The P-100A's three speed switch gives you full control over airflow and a set of on board power outlets allows you to link multiple units together. Weighing only 9.5 pounds, this air mover is built for portability. A convenient wrap-around cord storage design makes it easy to move throughout your home and garage.
Manufactured with rugged state-of-the-art injection mold technology, this air mover is ideal for drying tight areas such as crawl spaces, under counters, inside cabinets, bathrooms, auto interiors, and more. The P-100A's three speed switch gives you full control over airflow and a set of on board power outlets allows you to link multiple units together. Weighing only 9.5 pounds, this air mover is built for portability. A convenient wrap-around cord storage design makes it easy to move throughout your home and garage.
XPOWER P-130A Compact Air Mover with Daisy Chain
$95.00
$79.00
Ventilate and dry like a Pro at a fraction of the cost! The P-130A mini air mover blasts up to 700 CFM with its efficient 1/5 HP motor. Drawing only 2 Amps at its highest speed, this multipurpose air mover is a must have addition to your home or garage.
Manufactured with rugged state-of-the-art injection mold technology, this air mover is ideal for drying tight spaces such as crawl spaces, under counters, inside cabinets, bathrooms, auto interiors, and more. The P-130A features a three speed switch for full control over airflow and a set of on board power outlets that allow you to link multiple units together. Designed for easy storage and portability, the P-130A's stackable design features convenient wraparound cord storage and weighs less than 10 pounds.
XPOWER P-200AT 1/8 HP Mini Air Mover
$107.00
$89.00
Don’t let the size fool you!
The XPOWER P-200AT produces a plentiful airflow capacity for small to large jobs in every size location. Running at an efficient 1.5 Amps, this multipurpose mini air mover is a household must have! XPOWER’s exclusive compact and super lightweight design is ideal for drying tight spaces such as crawl spaces, under counters, inside cabinets, bathrooms, auto interiors, and more. Manufactured with rugged state-of-the-art injection mold technology, the P-200AT’s commercial grade housing and motor will ensure optimum performance and years of service.
Product Data Download:
The XPOWER P-200AT produces a plentiful airflow capacity for small to large jobs in every size location. Running at an efficient 1.5 Amps, this multipurpose mini air mover is a household must have! XPOWER’s exclusive compact and super lightweight design is ideal for drying tight spaces such as crawl spaces, under counters, inside cabinets, bathrooms, auto interiors, and more. Manufactured with rugged state-of-the-art injection mold technology, the P-200AT’s commercial grade housing and motor will ensure optimum performance and years of service.
Product Data Download:
XPOWER P-230AT 1/5 HP Mini Air Mover
$125.00
$89.00
Small but mighty, the XPOWER P-230AT produces a plentiful airflow capacity for small to large jobs in every size location. Weighing just under 10 lbs., this super portable air mover is ideal for drying tight spaces such as crawl spaces, under counters, inside cabinets, bathrooms, auto interiors, and more. With an on-board power outlets to connect several units together and a 3-hour timer, this unit is great for professional carpet cleaning, water damage restoration jobs, or home use. Manufactured with rugged state-of-the-art injection mold technology, the P-230AT’s commercial grade housing and motor will ensure optimum performance for years of service.
Product Data Download:
Product Data Download:
XPOWER P-400 1/4 HP Air Mover
$235.00
$204.00
The XPOWER P-400 air mover outperforms the competition as the class leader of compact and lightweight air movers. Ideal for professional as well as home use, this energy efficient air mover is compact and lightweight for effortless transportation. Use the P-400 to effectively and quickly dry carpets, floors, furniture, windows and walls. With its 1,600 CFM airflow capacity, the P-400’s compact size fits into tight spaces to direct airflow inside auto interiors, cabinets, under counters, crawl spaces, and more. This unit also features state-of-the-art injection mold technology to ensure long lasting durability and optimum performance.
XPOWER X-400A 1/4 HP Air Mover with Daisy Chain
$265.00
$230.00
The ¼ HP XPOWER X-400A is the ideal mid-sized air mover for both janitorial cleaning and water damage restoration drying applications. Drawing only 3 Amps and blasting up to 1,600 CFM, an included on board power outlets allows for an extension cord-free set up that is daisy-chainable up to 3 units. Featuring super durable and rugged ABS housing, the X-400A is stackable and weighs less than 20 lbs. Like all XPOWER air movers, the X-400A is ETL/CETL certified to ensure safety, performance, and years of service.
XPOWER Filter Kit for 400 Series Air Movers
$12.00
$10.00
The optional 400FK – Filter Kit is highly recommended as a means of keeping your unit from drawing in dust and debris. Made from highest quality ABS plastic material and washable nylon mesh, the 400FK also helps the air mover blows cleaner air. The 400FK Filter Kit fits all XPOWER 400 Series Air Movers.
XPOWER P-630 1/2 HP Air Mover
$277.00
$241.00
The XPOWER P-630 is the best choice for a lightweight and mobile air mover that does not compromise on power or performance. With a ½ HP motor capable of up to 2,800 CFM and running at an energy efficient 5.0 Amps, this unit weighs less than 20 lbs. 4 adjustable positioning angles allow the P-630 to dry carpets, floors, walls and large areas quickly and efficiently. Stackable and manufactured with rugged state-of-the-art injection mold technology, the P-630’s commercial grade housing and motor will ensure optimum performance and years of service.
XPOWER P-630HC 1/2 HP Air Mover w/ Telescopic Handle & Wheels & Carpet Clamp
$315.00
$274.00
The XPOWER P-630HC is the best choice for a lightweight and mobile air mover that does not compromise on power or performance. With a ½ HP motor capable of up to 2800 CFM and running at an energy efficient 5.0 Amps, this unit weighs less than 20 lbs. The included telescoping handle with wheels and carpet clamp provide added versatility and convenience. 4 adjustable positioning angles allow the P-630 to dry carpets, floors, walls and large areas quickly and efficiently. Stackable and manufactured with rugged state-of-the-art injection mold technology, the P-630’s commercial grade housing and motor will ensure optimum performance and years of service.
XPOWER X-600A 1/3 HP Air Mover with Daisy Chain
$0.00
$285.00
The XPOWER X-600A is a powerful air mover that speeds up the drying process for water damage restoration and janitorial cleaning applications. Drawing only 3.8 Amps and blasting up to 2400 CFM, this 1/3 HP unit will get the job done quickly and efficiently. An on-board GFCI power outlets that is daisy chainable up to 3 units eliminates the need for pesky extension cord set up. 4 positioning angles allow for drying floors, ceilings, walls, and more. Manufactured with rugged state-of-the-art injection mold technology, the X-600A’s commercial grade housing and motor will ensure optimum performance and years of service.
XPOWER Filter Kit for 600 Series Air Movers
$12.00
$10.00
The optional 600FK – Filter Kit is highly recommended as a means of keeping your unit from drawing in dust and debris. Made from highest quality ABS plastic material and washable nylon mesh, the 600FK also helps the air mover blows cleaner air. The 600FK Filter Kit fits all XPOWER 600 Series Air Movers.
XPOWER Telescopic Handle & Wheels Kit for 600 Series Air Movers
$26.00
$21.50
The XPOWER 600HK Handle Kit is designed to ease the handling of XPOWER 600 Series Air Movers. The 600HK Handle Kit is highly recommended for people with back problems or those who are not capable of lifting heavy machines, as it makes moving our heavier units from one place to another much easier and more convenient. The adjustable handle comes with 2 durable wheels.
XPOWER Carpet Clamp Kit
$18.00
$15.00
The XPOWER CCK is designed to fit XPOWER 600 Series and 800 Series Air Movers. The CCK firmly holds the carpet in place while directing the airflow underneath the carpeting. This is where much of your real damage can occur when you have a flood or water damage. The CCK Carpet Clamp for air movers helps to inhibit mold and mildew growth
XPOWER P-800 3/4 HP Air Mover
$328.00
$285.00
The powerful and rugged ¾ HP XPOWER P-800 can efficiently dry large to very large areas in commercial and residential drying applications. Its 4 different positioning angles allow the unit to dry carpets, floors, walls and ceilings, perfect for drying paint or water damaged areas. Stackable and 30% lighter than traditional air movers, this unit is easy to transport and store. The P-800 is manufactured with state-of-the-art injection mold technology and is ETL/CETL safety certified to ensure safety, performance and years of service.
Product Download Data:
Product Download Data:
XPOWER P-800H 3/4 HP Air Mover with Telescopic Handle & Wheels
$335.00
$279.00
The ¾ HP XPOWER P-800H is designed to quickly and effectively dry large areas in commercial and residential applications. The P-800H features a telescopic handle and wheels for easy mobility. Its multiple positioning angles allow the unit to dry carpets, floors, walls and ceilings; perfect for drying paint or water damaged areas. Stackable and weighing 30% lighter than traditional air movers, this unit is easy to transport and store anywhere! The P-800H is manufactured with state-of-the-art technology and is ETL/CETL safety certified to ensure safety, performance and years of service.
Product Data Download:
Product Data Download:
XPOWER P-830 1 HP Air Mover
$335.00
$279.00
The powerful and rugged XPOWER P-830 blasts up to 3,600 CFM with a 1 HP motor which can efficiently dry large areas in commercial and residential applications. Its 4 different positioning angles allow the unit to dry carpets, floors, walls and ceilings; perfect for drying paint or water damaged areas. Featuring a super durable and rugged Polypropylene housing, the P-830 is stackable and weighs only 24 lbs. The XPOWER P-830 is manufactured with state-of-the-art technology and is ETL/CETL safety certified to ensure safety, performance and years of service.
Product Data Download:
Product Data Download:
XPOWER P-830H 1 HP Air Mover with Telescopic Handle and Wheels
$359.00
$299.00
The powerful XPOWER P-830H is designed to quickly and effectively dry large areas in commercial and residential applications. Its multiple positioning angles allow the unit to dry carpets, floors, walls and ceilings, perfect for drying paint or water damaged areas. The P-830H features a telescopic handle and wheels for easy mobility. Stackable and weighing 30% lighter than traditional air movers, this unit is easy to transport and store anywhere! The P-830H is manufactured with state-of-the-art technology and is ETL/CETL certified to ensure safety, performance, and years of service.
Product Data Download:
Product Data Download:
X-830 1 HP Air Mover (ABS)
$0.00
$329.00
The powerful and rugged XPOWER X-830 blasts up to 3600 CFM with a 1HP motor which can efficiently dry large areas in commercial and residential applications. Its 4 different positioning angles allow the unit to dry carpets, floors, walls and ceilings, perfect for after painting or for treating water damaged areas. Featuring a super durable and rugged ABS housing, the X-830 is stackable and weighs only 25 lbs. The ETL/CETL certified X-830 is manufactured with state-of-the-art technology to ensure safety, performance, and years of service.
Product Data Download:
Product Data Download:
XPOWER X-830H 1 HP Air Mover w/ Telescopic Handle & Wheels
$391.00
$340.00
The powerful XPOWER P-830H is designed to quickly and effectively dry large areas in commercial and residential applications. Its multiple positioning angles allow the unit to dry carpets, floors, walls and ceilings, perfect for drying paint or water damaged areas. The P-830H features a telescopic handle and wheels for easy mobility. Stackable and weighing 30% lighter than traditional air movers, this unit is easy to transport and store anywhere! The P-830H is manufactured with state-of-the-art technology and is ETL/CETL certified to ensure safety, performance, and years of service.
Product Data Download:
Product Data Download:
XPOWER Filter Kit for 800 Series Air Movers
$14.00
$11.50
The optional 800FK – Filter Kit is highly recommended as a means of keeping your unit from drawing in dust and debris. Made from highest quality ABS plastic material and washable nylon mesh, the 800FK also helps the air mover blows cleaner air. The 800FK Filter Kit fits all XPOWER 800 Series Air Movers.
XPOWER Telescopic Handle & Wheels Kit for 800 Series Air Movers
$26.00
$21.50
The XPOWER 800HK Handle Kit is designed to ease the handling of XPOWER 800 Series Air Movers. The 800HK Handle Kit is highly recommended for people with back problems or those who are not capable of lifting heavy machines, as it makes moving our heavier units from one place to another much easier and more convenient. The adjustable handle comes with 2 durable wheels
P-150N Scented Air Mover with Ionizer
$155.00
$129.00
XPOWER's new Freshen Aire P-150N Scented Air Mover with Ionizer offers exceptionally quiet operation. Featuring an air purifying ionizer switch and patented refillable fragrance cartridge, this powerful 1/8 HP air mover quickly freshens a room, effectively dispensing both fragrance and odor neutralizing negative ions. Experience the revitalizing effects of negative ions within minutes as they quickly disperse to eliminate dust, allergens, mold spores, pet dander, and other airborne pollutants.
XPOWER Freshen Aire P-250NT 1/5 HP Scented Air Mover with Ionizer
$179.00
$149.00
XPOWER's Freshen Aire P-250NT fragranced ionizer offers a professional air mover with an air purifying anion switch and patented fragrance cartridge. Featuring a 3 hour timer and powerful 1/5 HP motor, the P-250NT quickly freshens a room with odor neutralizing negative ions and a refillable fragranced bead cartridge. Experience the revitalizing effects of negative ions within minutes as they quickly disperse to eliminate dust, allergens, mold spores, pet dander, and other airborne pollutants.
XPOWER Freshen Aire P-260NT 1/5 HP 4 Speed Scented Air Mover with Ionizer
$179.00
$149.00
XPOWER's Freshen Aire P-260NT fragranced ionizer offers a professional air mover with an air purifying ionizer switch and patented fragrance cartridge. Featuring a 3 hour timer and powerful 1/5 HP motor, the P-260NT quickly freshens a room with odor neutralizing negative ions and a refillable scented bead cartridge. Experience the revitalizing effects of negative ions within minutes as they quickly disperse to eliminate dust, allergens, mold spores, pet dander, and other airborne pollutants.
XPOWER Freshen Aire P-260AT 1/5 HP 4 Speed Scented Air Mover with Daisy Chain
$167.00
$139.00
XPOWER's Freshen Aire P-260AT air mover offers the same professional performance customers have come to know with XPOWER's air movers – but with the optional power of scent. A refillable scent cartridge combined with its powerful 1/5 HP motor quickly freshens a room much more effectively than conventional air fresheners. With 4-speed capability, a quiet low speed allows even more controlled scent dispersal.
XPOWER Freshen Aire P-450AT 1/3 HP Scented Air Mover with Daisy Chain
$252.00
$219.00
XPOWER’s Freshen Aire P-450AT air mover offers professional performance with the optional power of scent! A patented refillable scent cartridge combined with a powerful 1/3 HP motor allows you to quickly freshen a room much more effectively than conventional air fresheners.
This super portable air mover gives you the flexibility to scent areas while ventilating or drying at the same time. Its compact size is ideal for drying tight spaces such as inside crawl spaces and cabinets. Great for home use, carpet cleaners and water damage specialists; this unit features a 3 hr. timer, convenient daisy-chainable power outlet and rugged commercial grade housing. Also included is a citrus scented bead sample. Additional fragrances sold separately.
XPOWER’s complete line of products bring you only the best precision engineered technology for optimum performance and years of service.
XPOWER Freshen Aire P-450NT 1/3 HP Scented Air Mover with Ionizer
$260.00
$226.00
XPOWER’s Freshen Aire P-450NT 1/3 HP Scented Air Mover with Ionizer offers a professional air mover with an air purifying anion switch and patented fragrance cartridge. Featuring a 3 hour timer and powerful 1/3 HP motor, the P-450NT quickly freshens a room with odor neutralizing negative ions and a refillable fragranced bead cartridge. Experience the revitalizing effects of negative ions within minutes as they quickly disperse to eliminate dust, allergens, mold spores, pet dander, and other airborne pollutants.
This super portable air mover gives you the flexibility to improve air quality and eliminate odors while ventilating or drying. Its compact size is ideal for drying tight spaces such as inside crawl spaces and cabinets. Great for home use, carpet cleaners and water damage specialists; this unit features a 3 hr. timer, and rugged commercial grade housing. Also included is a citrus scented bead sample. Additional fragrances sold separately.
XPOWER’s complete line of products bring you only the best precision engineered technology for optimum performance and years of service.
XPOWER Freshen Aire P-650T 1/2 HP Scented Air Mover
$275.00
$229.00
XPOWER's Freshen Aire P-650T fragranced professional air mover with a patented fragrance cartridge. Featuring a 3 hour timer and powerful 1/2 HP motor, the P-650T quickly freshens a room with a refillable fragranced bead cartridge.
XPOWER Freshen Aire P-850T 1 HP Scented Air Mover
$335.00
$279.00
XPOWER's Freshen Aire P-850T fragranced professional air mover with a patented fragrance cartridge. Featuring a 3 hour timer and powerful 1 HP motor, the P-850T quickly freshens a room with a refillable fragranced bead cartridge.
XPOWER X-34AR 1/4 HP 1720 CFM 1.6 Amps Variable Speed Professional Axial Fan
$239.00
$199.00
Sold out
The X34AR axial fan is a powerhouse that offers maximum CFM output while efficiently drawing less than 2 Amps at its highest speed. A specially designed and fan grill excels in extending a powerful and focused straight stream of air up to 60 ft. This axial fan features a SEALED MOTOR to protect it from contaminants and water damage. The added variable speed control offers a full range of air speed and air volume. The included rack/stand provides 360° rotation for multiple positions when drying surfaces or circulating air. A super lightweight yet durable ABS injection molded housing allows this unit to be easily transportable and stackable up to 5 units. Equipped with a daisy chainable built-in power outlet and ETL/CETL safety certification—the X-34AR is the ultimate compact axial fan.
XPOWER X-34ASR2 1/4 HP 1720 CFM 1.6 Amps Variable Speed Professional Axial Fan
$245.00
$209.00
Sold out
The X34ASR axial fan is a powerhouse that offers maximum CFM output while efficiently drawing less than 2 Amps at its highest speed. A specially designed fan grill excels in extending a powerful and focused stream of air up to 60 ft. This axial fan features a sealed motor to protect it from contaminants and water damage. The added variable speed control offers a full range of air speed and volume. The included rust resistant Stainless Steel Rack/Stand provides 360° rotation for multiple positions when drying surfaces or circulating air. Super lightweight yet durable ABS injection molded housing allows for this unit to be easily transportable and stackable up to 5 units high. Equipped with daisy chainable built-in power outlets and ETL/CETL safety certification—the X-34ASR is the ultimate compact axial fan.
XPOWER X-34TR 1/4 HP 1720 CFM 1.6 Amps Variable Speed Professional Axial Fan
$222.00
$189.00
The X34TR axial fan is a powerhouse that offers maximum CFM output while efficiently drawing less than 2 Amps at its highest speed. The included 3-hour timer gives you the flexibility to save energy and set specific drying times. A specially designed fan grill excels in extending a powerful and focused straight stream of air up to 60 ft. This axial fan features a sealed motor to protect it from contaminants and water damage. The added variable speed control offers a full range of air speed and volume. The included rack/stand provides 360° rotation for multiple positions when drying surfaces or circulating air. Super lightweight yet durable ABS injection molded housing allows for this unit to be easily transportable and stackable up to 5 units high. ETL/CETL safety certified to ensure safety; the X-34TR provides optimum performance and years of service.
X-35AR 1/4 HP 1720 CFM 1.6 Amps Variable Speed HI-TEMP Professional Axial Fan
$287.00
$239.00
The X35AR axial fan is a high temperature fan that can withstand room temperatures up to 180°F and be used in conjunction with radial heaters to circulate hot air. Great for pest control and water damage restoration applications, the X-35AR is a powerhouse that offers maximum CFM output while efficiently drawing less than 2 Amps at its highest speed. A specially designed and fan grill excels in extending a powerful and focused straight stream of air up to 60 ft. This axial fan features a HI-TEMP SEALED MOTOR to protect it from contaminants and water damage. The added variable speed control offers a full range of air speed and air volume. The included rack/stand provides 360° rotation for multiple positions when drying surfaces or circulating air. A super lightweight yet durable and hi-temp ABS+ PC (Polycarbonate) injection molded housing allows this unit to be easily transportable and stackable up to 5 units. Equipped with a daisy chainable built-in power outlet and ETL/CETL safety certification — the X-35AR is the ultimate compact axial fan.
X-41ATR 1/3 HP 3600 CFM 2.4 Amps Variable Speed Turbo-Pro Professional Axial Fan
$383.00
$271.15
ITEM HAS BEEN DISCONTINUED BY MFG.
Our goal with the X-41 series was to bring an axial fan never seen before, through state-of-the-art research and design; we have brought a revolutionary series of fans to the industry that provides long-life operation, maintenance-free performance, high levels of efficiency, compact design and extremely low noise. Our Axial fans are completely speed controllable, a first in the industry. We also offer a high quality dual outlet for Daisy-Chaining and a 3 hour timer for ease of use in professional applications.
Our goal with the X-41 series was to bring an axial fan never seen before, through state-of-the-art research and design; we have brought a revolutionary series of fans to the industry that provides long-life operation, maintenance-free performance, high levels of efficiency, compact design and extremely low noise. Our Axial fans are completely speed controllable, a first in the industry. We also offer a high quality dual outlet for Daisy-Chaining and a 3 hour timer for ease of use in professional applications.
XPOWER 15 Ft. Ducting Hose (16 Inch. Diameter)
$194.00
$162.00
This XPOWER 15 ft. long ducting hose is a rugged PVC vinyl-coated polyester fabric hose with a black external PVC strip which resists exterior damage when dragging. This hose features a 16 inch. diameter and an integrated spring steel wire support coil which is flexible for expansion, compression and angled turns. Great for heating, air conditioning, dehumidification, blower, ventilation and exhaust jobs in a variety of industrial, residential, and construction applications. An optional ducting hose adapter kit (16DHK) is available to connect ducting to the XPOWER X-41ATR and X-47ATR axial fans.
XPOWER X-47ATR Professional Axial Fan (1/3 HP)
$383.00
$319.00
The XPOWER X-47 ATR is the ultimate axial fan – packed with features such as a variable speed control, 3 hour timer, 360-degree rotation rack/stand, and built in daisy chainable power outlets to get a variety of jobs done. A specially designed sealed motor prevents damage from water and other contaminants.
The X-47 efficiently produces up to 3600 CFM with a low 2.8 Amp draw. Use this high performance fan with its unique grille design to extend a powerful and focused stream of air up to 60 ft. in any direction. Easily transportable, this unit’s super lightweight yet durable ABS injection molded housing can be stacked up to 5 units high. Ducting hoses (16DH25 or 16DH15) and adapter kit (16DHK) are available separately for confined space ventilation.
XPOWER X-48ATR Professional High Temperature Axial Fan (1/3 HP)
$389.00
The XPOWER X-48ATR is a high temperature fan that can withstand room temperatures up to 180 degrees Fahrenheit and can be used in conjunction with radial heaters to circulate hot air. Great for pest control and water damage restoration applications, the X-48ATR features a variable speed control, low 2.8 Amp draw, 3 hour timer, 360-degree rotation rack/stand, and built in daisy chainable power outlets. Use this high performance fan with its unique grill design to extend a powerful and focused stream of air up to 60 ft. in any direction. The X-48ATR also features a sealed motor to protect it from contaminants and water damage. Easily transportable, this super lightweight fan can be stacked up to 5 units high and is ETL/CETL safety certified. Ducting hoses (16DH25 or 16DH15) and adapter kit (16DHK) are available separately for confined space ventilation.
XPOWER 25 Ft. Ducting Hose (16 Inch. Diameter)
$323.00
$269.00
This XPOWER 25 ft. long ducting hose is a rugged PVC vinyl-coated polyester fabric hose with a black external PVC strip which resists exterior damage when dragging. This hose features a 16 inch. diameter and an integrated spring steel wire support coil which is flexible for expansion, compression and angled turns. Great for heating, air conditioning, dehumidification, blower, ventilation and exhaust jobs in a variety of industrial, residential, and construction applications. An optional ducting hose adapter kit (16DHK) is available to connect ducting to the XPOWER X-41ATR and X-47ATR axial fans.
XPOWER 16 Inch. Axial Fan Ducting Hose Adapter Kit (16DHK)
$28.00
$23.00
Compatible with the XPOWER X-41ATR and X-47ATR axial fans, this ducting hose adapter kit gives your axial fan the added functionality to connect a ducting hose. XPOWER offers 15 ft. (16DH15) and 25 ft. (16DH25) long x 16 inch. diameter hoses to complete a variety of jobs.
XPOWER PL-700A Low Profile Series Air Mover, 1/3HP, 1050CFM, 3 Speed
$229.00
$199.00
XPOWER’s Low Profile Air Movers feature powerful ventilation in a compact size that does not
compromise on power. Able to store vertically or horizontally, these fans take up less than a 20” x 10” footprint when positioned on its side. A deep nested stackable design allows for stable stacking up to 6 units high to load in truck or on handcart. Get the job done with less equipment. XPOWER Low Profile Air Movers generate a high volume of extended air
that has the velocity to maximize your drying area. A large air intake diameter ensures efficient performance. Vents on underside of unit provide strategic airflow to dry the surface below fan.
compromise on power. Able to store vertically or horizontally, these fans take up less than a 20” x 10” footprint when positioned on its side. A deep nested stackable design allows for stable stacking up to 6 units high to load in truck or on handcart. Get the job done with less equipment. XPOWER Low Profile Air Movers generate a high volume of extended air
that has the velocity to maximize your drying area. A large air intake diameter ensures efficient performance. Vents on underside of unit provide strategic airflow to dry the surface below fan.
XPOWER XL-730A Low Profile Series Air Mover, 1/3HP, 1150CFM, 5 Speed
$309.00
$269.00
XPOWER’s Low Profile Air Movers feature powerful ventilation in a compact size that does not
compromise on power. Able to store vertically or horizontally, these fans take up less than a 20” x 10” footprint when positioned on its side. A deep nested stackable design allows for stable stacking up to 6 units high to load in truck or on handcart. Get the job done with less equipment. XPOWER Low Profile Air Movers generate a high volume of extended air
that has the velocity to maximize your drying area. A large air intake diameter ensures efficient performance. Vents on underside of unit provide strategic airflow to dry the surface below fan.
Product Data Download:
compromise on power. Able to store vertically or horizontally, these fans take up less than a 20” x 10” footprint when positioned on its side. A deep nested stackable design allows for stable stacking up to 6 units high to load in truck or on handcart. Get the job done with less equipment. XPOWER Low Profile Air Movers generate a high volume of extended air
that has the velocity to maximize your drying area. A large air intake diameter ensures efficient performance. Vents on underside of unit provide strategic airflow to dry the surface below fan.
Product Data Download:
XPOWER XL-760AM Professional Low Profile Air Mover (1/3 HP)
$339.00
$289.00
The XPOWER XL-760AM Low Profile Air Mover is the new compact powerhouse solution for restoration jobsites. A sealed 1/3 HP motor and large intake area generate a high volume of extended airflow which offers the necessary velocity to maximize drying area efficiently. Strategically placed vents on the underside of unit dry surface below the fan. The XL-760AM’s durable ABS plastic housing is built to withstand heavy commercial use. Drawing only 2.8 amps, multiple units can be daisy chained using the built in GFCI power outlets. An integrated hour meter monitors billable time. Stackable up to 6 units high, the XL-760AM features a slim profile that is the most compact in its class. A deep nested stackable allows for stable transportation. Unit can be positioned horizontally or vertically for drying and storage. Delivering powerful performance in a lightweight design along with an ergonomically positioned molded handle makes the XPOWER Low Profile series of air movers the new industry favorite.
Product Data Download:
Product Data Download:
XPOWER X-8 Industrial Confined Space Fan (1/3 HP)
$275.00
$229.00
The XPOWER X-8 is the only 8” diameter industrial confined space ventilator fan with a variable speed control switch in the air mover market. Featuring a low amp draw and performance plus induction motor, the X-8 delivers dry air for ventilation, drying or exhaust fan jobs. This unit can be used without hoses to create negative air pressure and air circulation in gyms, hallways and other large areas. Ventilate any narrow space including subterranean manholes and sewers up to 125’ with the optional 8” diameter ducting hose (8DH25). Lightweight and easily transportable, this unit weighs only 13.4 lbs. and features a durable ABS injection molded housing. Ducting hose transportation and set up is a breeze with the optional handled ABS ducting hose carrier (8DHC).
XPOWER X-12 1/2 HP 2500 CFM 4.3A Variable Speed 12 Industrial Confined Space Ventilator Fan
$371.00
$309.00
The XPOWER X-12 is the only 12” diameter industrial confined space ventilator fan with a variable speed control switch in the air mover market. Featuring a low amp draw and powerful sealed motor; the X-12 delivers dry air for ventilation, drying or exhaust fan jobs. This unit can be used without hoses to create negative air pressure and air circulation in gyms, hallways and other large areas. Ventilate any narrow space including subterranean manholes and sewers up to 125 feet with the optional 12” diameter ducting hose (12DH25). Lightweight and easily transportable, this unit weighs less than 25 lbs. and features a durable ABS injection molded housing to ensure optimum performance and years of service
XPOWER 25 Ft. Ducting Hose (8 Inch. Diameter)
$227.00
$189.00
This XPOWER 25 ft. long ducting hose is a rugged PVC vinyl-coated polyester fabric hose with a black external PVC strip which resists exterior damage when dragging. This hose features an 8 inch. diameter and an integrated spring steel wire support coil which is flexible for expansion, compression and angled turns. Great for heating, air conditioning, dehumidification, blower, ventilation and exhaust jobs in a variety of industrial, residential, and construction applications. This model is also compatible with the XPOWER X-8 confined space fan and ducting hose carrier (8DHC).
XPOWER 25 Ft. Ducting Hose (12 Inch. Diameter)
$251.00
$209.00
This XPOWER 25 ft. long ducting hose is a rugged PVC vinyl-coated polyester fabric hose with a black external PVC strip which resists exterior damage when dragging. This hose features a 12 inch. diameter and an integrated spring steel wire support coil which is flexible for expansion, compression and angled turns. Great for heating, air conditioning, dehumidification, blower, ventilation and exhaust jobs in a variety of industrial, residential, and construction applications. This model is also compatible with the XPOWER X-12 confined space fan
XPOWER 25 Ft. Ducting Hose with Carrier (8DHC25)
$359.00
$299.00
Compatible with the XPOWER X-8 confined space fan, this carrier with ducting hose combo makes transportation and set up a breeze for a variety of industrial, residential, and construction applications. With a convenient handle, this carrier easily snaps onto the X-8 with latches, features a sturdy balanced base design, and protects ducting hose from damage during transport and storage. The included XPOWER 25 ft. ducting hose is a rugged PVC vinyl-coated polyester fabric hose with a black external PVC strip which resists exterior damage when dragging. The 8 inch. diameter hose also has an integrated spring steel wire support coil which is flexible for expansion, compression and angled turns.
XPOWER FM-48 Misting Fan
$149.00
$129.00
XPOWER's FM-48 misting fan is a super portable cooling solution that creates a comfortable outdoor environment during hot spring and summer days. Setup is quick and easy-simply plug in and connect to a standard garden hose to reduce ambient temperature up to 30 degrees. A high performance sealed motor generates up to 600 CFM. Four nozzles distribute a fine mist over a wide area that will cool down outdoor patios, pool areas, picnics, sporting events and other outdoor activities. Set up the misting fan in gardens and greenhouses to keep plants healthy in hard weather. Use the multipurpose FM-48 without the misting feature as a year-round drying and ventilation utility fan.
XPOWER A-2 Airrow Pro Multipurpose Electric Duster & Blower
$65.00
$54.00
Unleash over 500 Watts of power to blast away dust from window blinds, keyboards and electronics, underneath appliances, and so much more. More than just a replacement to your canned air dusters, the XPOWER Airrow Pro allows you the power and flexibility to dust, pump air, and dry a variety of surfaces. By replacing your canned air with the Airrow Pro you can feel confident about not only eliminating the cost of disposable canned air dusters, but freeing home/office of toxic inhalants as well. Powered only by electricity, the Airrow Pro is completely free of dangerous fluorocarbons and other deadly inhalants/propellants. The Airrow Pro comes with several attachments for different applications, and has a 2 speed (hi/lo) switch.
Product Data Download:
Product Data Download:
XPOWER A-5 Multi-Use Electric Duster
$79.00
$69.00
The XPOWER A-5 Multi-Purpose Electric Duster is your new partner in maximizing efficiency in various cleaning applications! Constructed with durable ABS material, the safety-certified A-5 is lightweight at under 5lbs and comes with 7 nozzle attachments, a 5 ft. flexible hose, and a reusable vacuum cleaner bag to complete various jobs that require specific types of air movement. Unleash the powerful 2 HP motor through 2 speed settings (low/high) to quickly dust around your home, service electronics, perform small-capacity vacuuming, and achieve a professional finish in automobile drying and detailing.
Americ/Schaefer EPF-16 Ventilator, 115V
$324.00
The EPF-16 (16") blower takes ventilation and drying applications to the next level. Combining an energy efficient motor (drawing only 2.3 amps) with a custom designed fan blade, this unit will dry faster and provide more ventilation in less time. The EPF's 360° fully rotational design allows you to direct airflow (2580 cfm) accurately and economically to any given area. Setup is a breeze, simply turn the adjusting knobs and lock in place. For use in Non-Explosive/Non-Flammable environments only.
Features
Features
- CFM rating of 2,580 (73.0 m3)
- Weighs only 27 pounds (12.24 Kg)
- Full 360° Airflow rotation
- Low amp draw
- Quick Adjustment Knobs
Americ/Schaefer VAF3000P Blower 12" Diameter Pneumatic Confined Space Ventilator
$1,125.00 - $1,387.50
The intrinsically safe design ensures against dangerous sparking.
Our energy-efficient, high-performance motor is totally enclosed, giving you the assurance to work safely. With a CFM rating of 2,063, the VAF3000P can provide all the continuous circulating airflow you need to get the job done.
Ideal for confined spaces that require a powerful ventilator that meets strict hazardous space standards, the VAF3000P delivers high performance with uncompromising safety.
VAF3000P Pneumatic Ventilator Features:
Our energy-efficient, high-performance motor is totally enclosed, giving you the assurance to work safely. With a CFM rating of 2,063, the VAF3000P can provide all the continuous circulating airflow you need to get the job done.
Ideal for confined spaces that require a powerful ventilator that meets strict hazardous space standards, the VAF3000P delivers high performance with uncompromising safety.
VAF3000P Pneumatic Ventilator Features:
- CFM rating of 2,063
- Weighs only 28 pounds (12.7 Kg)
- Stackable to save storage or work area space
- Powerful 1.5 Hp pneumatic motor
- Capability to connect up to 125 feet (38 m) of straight duct
- Redirects stale compressed air away from the main air stream
- INTRINSICALLY SAFE
- UL and C-UL listed for use in Class 1, Groups A, B, C and D Hazardous Locations*
*Note: If ducting is required in these atmospheres, use Duct Part AM-DC1225 and aluminum coupler part AM-CA12 to maintain an intrinsically safe system.
Americ/Schaefer VAF1500A 8" Diameter Industrial Confined Space Ventilator, 115V
$509.00 - $882.50
The ideal workhorse. Perfect for small confined spaces, such as manholes and sewers, these compact blowers deliver maximum airflow for a safe, comfortable and controlled work environment.
Your construction, utility, or telephone crews can depend on the VAF1500A/B models to deliver a continuous flow of fresh air.
For a versatile portable ventilator with just the right amount of power, the VAF1500A/B (blower/extractor) or removal of inlet duct ring (blower only) is ideally suited for light industrial or utility applications.
VAF1500A Utility Ventilator Features:
Your construction, utility, or telephone crews can depend on the VAF1500A/B models to deliver a continuous flow of fresh air.
For a versatile portable ventilator with just the right amount of power, the VAF1500A/B (blower/extractor) or removal of inlet duct ring (blower only) is ideally suited for light industrial or utility applications.
VAF1500A Utility Ventilator Features:
- 115V, 60 Hz, 1/4 Hp, 2.5 current amps, 3200 rpm.
- CFM rating of 877 (VAF1500) and 1,262 (VAF1500 with inlet duct ring removed)
- Weighs only 18 pounds (8.2 Kg)
- Stackable to save storage or work area space
- Available in bright yellow for high visibility
- Capability to connect up to 50 feet (15.24 m) of straight duct
- Ideal for manhole applications
- For use in non-explosive environments
- Available in 230V
- VAF1500A is UL and CUL listed
- VAF1500B is CE listed
Americ/Schaefer VAF8000A-3 3 Phase 20" Diameter Industrial Confined Space Ventilator, 230V
$2,700.00 - $3,525.00
Hold on to your seat. This 20" unit outperforms ventilators three and four times its size.
If you're in need of a ventilator for larger applications, turn to the one that provides extreme performance. Turn to the VAF8000A/B.
Equipped with a powerful 5 Hp motor, the VAF8000A/B generates both positive and negative airflow at an outstanding maximum capacity of 9,968 CFM. Designed for use in areas which require a greater exchange of air, the VAF8000 promises performance.
VAF8000A-3 High-Capacity Ventilator Features:
If you're in need of a ventilator for larger applications, turn to the one that provides extreme performance. Turn to the VAF8000A/B.
Equipped with a powerful 5 Hp motor, the VAF8000A/B generates both positive and negative airflow at an outstanding maximum capacity of 9,968 CFM. Designed for use in areas which require a greater exchange of air, the VAF8000 promises performance.
VAF8000A-3 High-Capacity Ventilator Features:
- 230V AC~, three-phase, 60/50 Hz, 5 HP, 13/11 current amps, 3495/2950 rpm.
- CFM rating of 9,968
- Weighs only 119 pounds (53.97 Kg)
- Powerful 5 Hp electric motor
- Ideal for larger areas that require greater airflow
- Dual wall shell design
- Two built-in handles
- For use in non-explosive environments
- Available in 440V
- VAF8000A-3, available in single-phase. Call for details.
Americ/Schaefer VAF3000A 12" Diameter Industrial Confined Space Ventilator, 115V
$468.44 - $743.75
On-demand performance. Ideal for use in confined spaces that require a powerhouse air ventilator, the VAF3000A can handle your most demanding industrial needs.
With a forceful 1 Hp motor, the VAF3000A can deliver both positive and negative airflow at an incredible maximum capacity of 2,796 CFM in the most difficult work environments.
No matter what your industry or application (construction, demolition, utility, paper mill, shipyard, power station, tank purging, or manufacturing), the VAF3000A is deisgned to take on the toughtest of jobs.
VAF3000A Industrial Ventilator Features:
With a forceful 1 Hp motor, the VAF3000A can deliver both positive and negative airflow at an incredible maximum capacity of 2,796 CFM in the most difficult work environments.
No matter what your industry or application (construction, demolition, utility, paper mill, shipyard, power station, tank purging, or manufacturing), the VAF3000A is deisgned to take on the toughtest of jobs.
VAF3000A Industrial Ventilator Features:
- 115V AC~, Single phase, 60/50 Hz., 1 Hp, 8/5.7 current amps, 3300/2800 rpm.
- CFM rating of 2,796
- Weighs only 32.5 pounds (14.74 Kg)
- Stackable to save storage or work area space
- Powerful 1 Hp electric motor
- Capability to connect up to 125 feet (38 m) of straight duct
- Ideal for confined spaces that require greater airflow
- For use in non-explosive environments
- Available in 230V {VAF3000B}
- UL and CUL Listed
Americ/Schaefer VAF-1500B 8" Diameter Industrial Confined Space Ventilator, 230V
$472.50 - $660.00
The ideal workhorse. Perfect for small confined spaces, such as manholes and sewers, these compact blowers deliver maximum airflow for a safe, comfortable and controlled work environment.
Your construction, utility, or telephone crews can depend on the VAF1500A/B models to deliver a continuous flow of fresh air.
For a versatile portable ventilator with just the right amount of power, the VAF1500A/B (blower/extractor) or removal of inlet duct ring (blower only) is ideally suited for light industrial or utility applications.
VAF1500B Utility Ventilator Features:
Your construction, utility, or telephone crews can depend on the VAF1500A/B models to deliver a continuous flow of fresh air.
For a versatile portable ventilator with just the right amount of power, the VAF1500A/B (blower/extractor) or removal of inlet duct ring (blower only) is ideally suited for light industrial or utility applications.
VAF1500B Utility Ventilator Features:
- 230V AC~, 50 Hz., 1/4 Hp, 1.3 current amps, 3200/2260 rpm.
- CFM rating of 877 (VAF1500) and 1,262 (VAF1500 with inlet duct ring removed)
- Weighs only 18 pounds (8.2 Kg)
- Stackable to save storage or work area space
- Available in bright yellow for high visibility
- Capability to connect up to 50 feet (15.24 m) of straight duct
- Ideal for manhole applications
- For use in non-explosive environments
- Available in 230V
- VAF1500A is UL and CUL listed
- VAF1500B is CE listed
Americ/Schaefer VAF3000B 12" Diameter Industrial Confined Space Ventilator, 230V
$630.00 - $892.30
On-demand performance. Ideal for use in confined spaces that require a powerhouse air ventilator, the VAF3000B can handle your most demanding industrial needs.
With a forceful 1 Hp motor, the VAF3000B can deliver both positive and negative airflow at an incredible maximum capacity of 2,492 CFM in the most difficult work environments.
No matter what your industry or application (construction, demolition, utility, paper mill, shipyard, power station, tank purging, or manufacturing), the VAF3000B is deisgned to take on the toughtest of jobs.
VAF3000B Industrial Ventilator Features:
With a forceful 1 Hp motor, the VAF3000B can deliver both positive and negative airflow at an incredible maximum capacity of 2,492 CFM in the most difficult work environments.
No matter what your industry or application (construction, demolition, utility, paper mill, shipyard, power station, tank purging, or manufacturing), the VAF3000B is deisgned to take on the toughtest of jobs.
VAF3000B Industrial Ventilator Features:
- 230V AC~, Single phase, 50 Hz., 1 Hp, 4.2 current amps, 2850 rpm.
- CFM rating of 2,492
- Weighs only 32.5 pounds (14.74 Kg)
- Stackable to save storage or work area space
- Powerful 1 Hp electric motor
- Capability to connect up to 125 feet (38 m) of straight duct
- Ideal for confined spaces that require greater airflow
- For use in non-explosive environments
- UL and CUL Listed, CE Listed
Americ/Schaefer VAF8000B-3 3 Phase 20" Diameter Industrial Confined Space Ventilator, 440V
$2,700.00 - $3,525.00
Hold on to your seat. This 20" unit outperforms ventilators three and four times its size.
If you're in need of a ventilator for larger applications, turn to the one that provides extreme performance. Turn to the VAF8000A/B.
Equipped with a powerful 5 Hp motor, the VAF8000A/B generates both positive and negative airflow at an outstanding maximum capacity of 9,968 CFM. Designed for use in areas which require a greater exchange of air, the VAF8000 promises performance.
VAF8000B High-Capacity Ventilator Features:
If you're in need of a ventilator for larger applications, turn to the one that provides extreme performance. Turn to the VAF8000A/B.
Equipped with a powerful 5 Hp motor, the VAF8000A/B generates both positive and negative airflow at an outstanding maximum capacity of 9,968 CFM. Designed for use in areas which require a greater exchange of air, the VAF8000 promises performance.
VAF8000B High-Capacity Ventilator Features:
- 440V AC~, three-phase, 60/50 Hz, 5 HP, 6.5/5.5 current amps, 3495/2950 rpm.
- Weighs only 119 pounds (53.97 Kg)
- Powerful 5 Hp electric motor
- Ideal for larger areas that require greater airflow
- Dual wall shell design
- Two built-in handles
- For use in non-explosive environments
- Available in 230V
Americ/Schaefer VAF8000A Confined Space Ventilator, 20" Diameter, 220V, 1-Phase, 60 Hz
$3,150.00 - $3,975.00
Hold on to your seat. This 20" unit outperforms ventilators three and four times its size.
If you're in need of a ventilator for larger applications, turn to the one that provides extreme performance. Turn to the VAF8000.
Equipped with a powerful 5 Hp motor, the VAF8000 generates both positive and negative airflow at an outstanding maximum capacity of 9,968 CFM. Designed for use in areas which require a greater exchange of air, the VAF8000 promises performance.
VAF8000A High-Capacity Ventilator Features:
If you're in need of a ventilator for larger applications, turn to the one that provides extreme performance. Turn to the VAF8000.
Equipped with a powerful 5 Hp motor, the VAF8000 generates both positive and negative airflow at an outstanding maximum capacity of 9,968 CFM. Designed for use in areas which require a greater exchange of air, the VAF8000 promises performance.
VAF8000A High-Capacity Ventilator Features:
- 220V AC~, single-phase, 60/50 Hz, 5 HP, 13/11 current amps, 3495/2950 rpm.
- CFM rating of 9,968
- Weighs only 119 pounds (53.97 Kg)
- Powerful 5 Hp electric motor
- Ideal for larger areas that require greater airflow
- Dual wall shell design
- Two built-in handles
- For use in non-explosive environments
- Available in 440V
Dri-Eaz #F174 Vortex Axial Fan
$615.00
This Dri-Eaz airmover will ventilate confined spaces through up to 125 feet of Sto&Go ducting – or propel dry air across large open areas to aid in drying. Improve indoor air quality; remove unwanted odors.
Versatile ventilation. Use the Vortex to ventilate, create negative pressure, or add to a complete drying system. The Vortex can be set-up for operation by itself or with up to 125 feet of ducting – making it ideal for ventilation plus a range of drying applications including gyms, concrete pads and hallways.
Powerful and handy. With its powerful 1.0 hp motor, the Vortex can effectively drive air through ducting or across large open areas. A built-in handle and simple 1-speed switch make operation a snap.
Download Product Manual Here
Download Product Specs Here
Versatile ventilation. Use the Vortex to ventilate, create negative pressure, or add to a complete drying system. The Vortex can be set-up for operation by itself or with up to 125 feet of ducting – making it ideal for ventilation plus a range of drying applications including gyms, concrete pads and hallways.
Powerful and handy. With its powerful 1.0 hp motor, the Vortex can effectively drive air through ducting or across large open areas. A built-in handle and simple 1-speed switch make operation a snap.
Download Product Manual Here
Download Product Specs Here
Dri-Eaz #F228 AirWolf Airmover
$629.00
Unrivalled air delivery
The AirWolf provides an unbeatable combination of powerful CFM and strong static pressure. Optimized for use with the WolfPack hardwood floor drying system, the AirWolf/WolfPack combination dries wood floors from the bottom out and can help avoid costly repair bills.
Product Specifications: Model F228 (115 volt)
Power 9.8 amps; Static pressure 7.3 in.; Air movement 780 CFM
Dimensions (H × W × D) 17 × 21 × 16 in. 43 × 53 × 41 cm
Weight 35 lbs. 16 kg; Motor 1.0 hp; Controls On/Off switch (1 speed)
Stackable Yes; Safety UL/C-UL listed
Download Product Manual
DriForce, Airwolf and Wolfpack Flyer
The AirWolf provides an unbeatable combination of powerful CFM and strong static pressure. Optimized for use with the WolfPack hardwood floor drying system, the AirWolf/WolfPack combination dries wood floors from the bottom out and can help avoid costly repair bills.
Product Specifications: Model F228 (115 volt)
Power 9.8 amps; Static pressure 7.3 in.; Air movement 780 CFM
Dimensions (H × W × D) 17 × 21 × 16 in. 43 × 53 × 41 cm
Weight 35 lbs. 16 kg; Motor 1.0 hp; Controls On/Off switch (1 speed)
Stackable Yes; Safety UL/C-UL listed
Download Product Manual
DriForce, Airwolf and Wolfpack Flyer
Dri-Eaz #F259 Ace TurboDryer
$445.00
Six ways to dry
Looking for an airmover that offers six different positions to help you tackle the most difficult drying challenges? Looking for the most CFM per circuit of any airmover on the market? Look no further: it’s called the Ace!
6 operating positions. Unique 6-position versatility of the Ace means you can use it on a wider variety of air moving tasks than ever before. Use the Ace on drywall, hardwood floors, sub-floors, baseboards, ceilings, or any type of building materials and structures.
Ventilate crawlspaces. Use the Ace to pull air out of crawlspaces and establish a negative pressure. The negative pressure will draw clean, heated air from other parts of the structure into the crawlspace and keep contaminant from being drawn into clean areas of the structure.
Download Product Manual
Virtual Training Center
Looking for an airmover that offers six different positions to help you tackle the most difficult drying challenges? Looking for the most CFM per circuit of any airmover on the market? Look no further: it’s called the Ace!
6 operating positions. Unique 6-position versatility of the Ace means you can use it on a wider variety of air moving tasks than ever before. Use the Ace on drywall, hardwood floors, sub-floors, baseboards, ceilings, or any type of building materials and structures.
Ventilate crawlspaces. Use the Ace to pull air out of crawlspaces and establish a negative pressure. The negative pressure will draw clean, heated air from other parts of the structure into the crawlspace and keep contaminant from being drawn into clean areas of the structure.
Download Product Manual
Virtual Training Center
Dri-Eaz #F377 Studebaker AirPath
$595.00
Dry floors in minutes
The AirPath from Dri-Eaz lets you dry all types of carpets and hard floors in minutes, not hours. Offering an innovative 360° outlet grill design and 40 mph airflow, the AirPath lets you tackle the toughest floor drying challenges fast and effectively. The AirPath attack works by pulling warm, dry air from above and directing it across the entire surface of the floor – up to 12 feet in all directions. Simply place the AirPath in the center of a room and lock it in to place. Carpets, tile, vinyl hardwood floors will dry faster than ever.
Product Specifications:
Weight: 38 lbs.
Dimensions (H × W × D): 14.7 × 25.4 × 26 in.
Amp Draw: 7.5 amps
Speed: 2 speed switch
Power: 746 W (1.0 HP)
Cord length: 25 ft.
Fan: 8 blades
Construction: Rotomolded housing
Casters: Plastic (locking)
Safety: ETL listed to UL and CSA standards
Download Product Manual
Airpath Marketing Flyer
The AirPath from Dri-Eaz lets you dry all types of carpets and hard floors in minutes, not hours. Offering an innovative 360° outlet grill design and 40 mph airflow, the AirPath lets you tackle the toughest floor drying challenges fast and effectively. The AirPath attack works by pulling warm, dry air from above and directing it across the entire surface of the floor – up to 12 feet in all directions. Simply place the AirPath in the center of a room and lock it in to place. Carpets, tile, vinyl hardwood floors will dry faster than ever.
Product Specifications:
Weight: 38 lbs.
Dimensions (H × W × D): 14.7 × 25.4 × 26 in.
Amp Draw: 7.5 amps
Speed: 2 speed switch
Power: 746 W (1.0 HP)
Cord length: 25 ft.
Fan: 8 blades
Construction: Rotomolded housing
Casters: Plastic (locking)
Safety: ETL listed to UL and CSA standards
Download Product Manual
Airpath Marketing Flyer
***DISCONTINUED***Dri-Eaz #F350 Sahara E Turbo Dryer
$305.00
***DISCONTINUED BY DRI-EAZ****
Get the durability and reliability of the Sahara at an economical price.
Basic design & operation. With a .25 hp motor and 1-speed operation, the Sahara E Turbodryer® keeps drying simple. It stacks for storage and disassembles easily for cleaning.
Built to last. The Sahara E features the same legendary durability and reliability as the original Sahara – still the most trusted, long-lasting carpet dryer on the market.
Product Specifications: Model F350
Dimensions (H × W × D) 18.8 × 17 × 18.3 in. 47.8 × 43 × 47 cm;
Weight 24 lbs 11 kg Motor 0.25 HP; Speeds One; Power 7.2 amps;
Switch Recessed rotary; Rated airflow 2250 CFM 3823 CMH;
Tested Velocity 2042 Ft/Min 622 M/MIN Airflow per amp 129 CFM;
Tested airflow per 15 amp circuit 926 CFM Static pressure 1 in. 2.5 cm;
Cord length 15 ft. 4.6 m; Operating positions 3 (0°, 45° and 90°)
Stackable Yes; Housing Rotomolded polyethylene; UL, C-UL Listed Yes
Download Product Manual
Download Specifications Chart
Get the durability and reliability of the Sahara at an economical price.
Basic design & operation. With a .25 hp motor and 1-speed operation, the Sahara E Turbodryer® keeps drying simple. It stacks for storage and disassembles easily for cleaning.
Built to last. The Sahara E features the same legendary durability and reliability as the original Sahara – still the most trusted, long-lasting carpet dryer on the market.
Product Specifications: Model F350
Dimensions (H × W × D) 18.8 × 17 × 18.3 in. 47.8 × 43 × 47 cm;
Weight 24 lbs 11 kg Motor 0.25 HP; Speeds One; Power 7.2 amps;
Switch Recessed rotary; Rated airflow 2250 CFM 3823 CMH;
Tested Velocity 2042 Ft/Min 622 M/MIN Airflow per amp 129 CFM;
Tested airflow per 15 amp circuit 926 CFM Static pressure 1 in. 2.5 cm;
Cord length 15 ft. 4.6 m; Operating positions 3 (0°, 45° and 90°)
Stackable Yes; Housing Rotomolded polyethylene; UL, C-UL Listed Yes
Download Product Manual
Download Specifications Chart
Dri- Eaz #F351 Sahara Pro X3 Turbo Dryer
$365.00
The ultimate restoration airmover
The Sahara Pro X3 delivers powerful 2700 CFM airflow exactly where you need it -- at floor level, up walls, or up stairways. Features three speed settings, low amp draw, built-in breaker-protected outlets and a rugged rotomolded housing.
Product Specifications: Model F351
Dimensions (H × W × D) 18.8 × 17 × 18.3 in. 47.8 × 43 × 47 cm
Weight 27 lbs. 12 kg; Motor 0.33 HP Speeds Three (3, 3.5 & 4 amps)
Power 4 amps; Switch Recessed rotary;
Rated airflow 2700 CFM 4587 CMH
Tested velocity 2071 FT/MIN 631 M/MINCFM per amp 235 CFM/amp
Tested CFM per 15 amp circuit 2817 CFM/circuit
Static pressure 1.28 in. 3.25 cm; Cord length 25 ft. 7.6 m
Operating positions 3 (0°, 45° and 90°); Carpet clamp Available as accessory;
Stackable Yes; Circuit breaker/GFCI Yes;
Housing Rotomolded polyethylene; Safety UL/C-UL listed
Download Product Manual
Airmover Specifications
The Sahara Pro X3 delivers powerful 2700 CFM airflow exactly where you need it -- at floor level, up walls, or up stairways. Features three speed settings, low amp draw, built-in breaker-protected outlets and a rugged rotomolded housing.
Product Specifications: Model F351
Dimensions (H × W × D) 18.8 × 17 × 18.3 in. 47.8 × 43 × 47 cm
Weight 27 lbs. 12 kg; Motor 0.33 HP Speeds Three (3, 3.5 & 4 amps)
Power 4 amps; Switch Recessed rotary;
Rated airflow 2700 CFM 4587 CMH
Tested velocity 2071 FT/MIN 631 M/MINCFM per amp 235 CFM/amp
Tested CFM per 15 amp circuit 2817 CFM/circuit
Static pressure 1.28 in. 3.25 cm; Cord length 25 ft. 7.6 m
Operating positions 3 (0°, 45° and 90°); Carpet clamp Available as accessory;
Stackable Yes; Circuit breaker/GFCI Yes;
Housing Rotomolded polyethylene; Safety UL/C-UL listed
Download Product Manual
Airmover Specifications
