Portable Heaters
>
Infrared Electric Heaters
>
TPI Fostoria Infrared Emitter Electric Heaters
>
FSS Series Heavy Duty Flat Panel Emitter Electric Overhead Infrared Heater

FSP Series Heavy Duty Flat Panel Emitter Electric Overhead Infrared Heater

Benefits:

Heats people and objects to a desired comfort level for overhead heating applications.
Elements have a life expectancy of 25,000 hours and operate at radiant efficiency of 78.5% for delivered heat!

What differentiates this from other products:

This element (flat panel emitter) generates large amounts of infrared heat for a concentrated area for less the operating cost of existing metal sheath heating elements.
Elements are designed for rugged environments without the use of glass materials.

Application Solutions:

Indoor / Outdoor (semi-protected) spot heating for steel mills, foundries, paper mills, industrial facilities, warehouses, workstation areas, and material handling environments.
Ideal for spot heating in high-bay industrial applications
Elements/heaters are designed for rugged, dirty, industrial environments

Features:

Heating elements included (Single Flat Panel Emitter)
Medium Wave Emitter, operates at 78.5% radiant efficiency
ETL Listed for suspended indoor & semi-protected outdoor applications
60º symmetrical heat pattern
Gold anodized aluminum housing
L-brackets included for chain suspension or rigid mounting
Electrical enclosure included for direct wire installation
Single or Three-phase wiring configurations
Units can be mounted horizontally or vertically
Wire guards provided on all models
Shipped fully assembled
Made in U.S.A.

California Residents see Prop 65 WARNINGS

Mounting Clearances & Recommended Mounting Height

Value	Mounting Clearances
All FSS Models	24" from ceiling 36" from vertical surface & from heater 72" from face of heater to combustible surface
FSS-95 Tandem Only	87" from face of heater to combustible surface

KW	Recommended Mounting Height
1.4	8'-10'
3.1	8'-12'
4.3	10'-14'
9.5	12'-16'
(2)9.5	15'-30'

Housing & Construction: .040 Gold anodized Aluminum housing for efficient, long-term reflectivity and corrosion resistance. High-density radiant heat. Housing is ETL Listed for indoor, dry environment applications only. Made in U.S.A.
Reflector: 60 degree symmetric heat pattern, reference the sizing chart to determine overall coverage based on the mounting height.
Elements: Heavy duty flat panel emitter. Available wattages in 1450, 3150, 4300 and 9500 Watts per element. Available in standard voltages from 120 to 600 Volts.
Controls: Flat panel emitter heaters are not manufactured with any control device on the unit.All controls and accessories should be specified as remote mounted. Please consult the technical sales department of factory for help in determining applicable controls. Please follow installation instructions that accompany each heater.
Accessories: Power contactor panels.

Sizing Chart

Mounting Height	MFG Model Number	Length	Width	Coverage (SQ. FT)	Watts (SQ.FT)
8'	FSS-14	8	8	64	22.7
8'	FSS-31	9	8	72	43.8
10'	FSS-14	11	10	110	13.2
10'	FSS-31	11	10	110	28.6
10'	FSS-43	12	10	120	35.8
12"	FSS-31	12	11.5	138	22.8
12'	FSS-43	14	12	168	25.6
12'	FSS-95	15	13	195	48.7
14'	FSS-43	16	14	224	19.2
14'	FSS-95	18	16	288	30.0
16'	FSS-43	18	16	288	14.9
16'	FSS-95	21	18	378	25.1
16'	FSS-95 Tandem	24	19	456	41.7
18'	FSS-95	23	20	460	20.7
18'	FSS-95 Tandem	28	20	560	33.9
20'	FSS-95 Tandem	28	23	644	29.5
24'	FSS-95 Tandem	33	27	891	21.3
30'	FSS-95 Tandem	41	32	1312	14.5