High-temperature rated, ball bearing motor; forward curved centrifugal blower; standard with airflow switch, temperature limit controls (manual and automatic resets), and lockable disconnect switch with fuse block • Galvannealed 20 Gauge heavy-duty metal housing • Totally enclosed, finned tubular stainless steel heating elements, provide the benefits of closer temperatre regulation, less chance of shock hazards, less susceptibility for shorting, easy service, and will better withstand physical abuse • Capability of mounting for in-room use, or mounting at an external wall/ceiling, with the heat inlet/outlet ducted to/from the room. 1” duct flanges at inlet and discharge ends are standard, to provide for ducting on the unit • All models listed are designed for permanent mounting and hard wiring • A typical hot room should be totally enclosed, with provisions made to keep air from escaping, other than the air being ducted thru the heater itself when the unit is mounted outside the room. As always, insulation should be considered for walls and ceiling, to maximize energy efficiency and heater performance
TPI Thermal Area Treatment Heater
TPI Thermal Area Treatment Heater TAT5-208-1/3BB/1T - 9.8KW 1PH 208V
$12,900.00
$7,095.00
TPI TAT5-240-1/3BB/IT Thermal Area Treatment Heater - 9.8KW 1PH 240V
$12,900.00
$7,095.00
TPI TAT8-208-1/3BB-1T Thermal Area Treatment Heater - 12.9KW 1PH 208V
$13,500.00
$7,425.00
TPI TAT8-240-1/3BB1T Thermal Area Treatment Heater - 12.9KW 1PH 240V
$13,500.00
$7,425.00
TPI TAT20-480-3/3BB/1T Thermal Area Treatment Heater - 24.5KW 1PH 480V
$15,000.00
$8,250.00
TPI TATILC25 MULTI SYSTEMS CORDSET
$250.00
$137.50
