Frost Fighter IDF500 Oil/Diesel 420,000 BTU/h 115V / 20Amp
IDF 500 Indirect Oil Fired Heater Input 500,000 BTU
IDF 500 - Fuel Oil, Diesel, JP8, Kerosene Fuel
Output Capacity: 450,000 BTUs Heated Air (w/o duct) 3,100 CFM
115 volt, 60 Hz, 20 amp electric motor
Heat Rise 200° F - (@50 degree F ambient) ; Discharge Temperature 200°F (93.3°C) to 0°F (-17.8°C)Â
Fuel Type: Fuel Oil, Diesel, JP8, Kerosene Fuel * ; 42 gallon (158.99 L) Poly Tank with gauge and environmental containment.
Fuel Consumption Rate 3.0 GPH
Nozzle Size 2.50 USGPH 60' B (solid) Pump Pressure 140 P.S.I Maximum
Approx. Run Time 11 Hours
Exhaust Flue Size 6" Efficiency 81.0%
Heater only Dimensions 76.5" L x 27" W x 51" H Dry Weight: 510 lbs.
Shipping Dimensions Crated: 83" L x 38" W x 52.5" H Packaged Shipping Weight 562
Approved: CSA
Options 2 x 12" Outlets (or 1 x 16" outlet)
*(No. 1 fuel oil, Diesel, JP8, Kerosene Fuel is recommended when ambient temperature is less than 8 F (-10 C) Discharge temperature (@50 F ambient).
Specifications are subject to change without prior notice.)Â
- Standard Lifting Bail Included
- Industrial Grade Beckett Burner (Oil/Diesel Version)
- Can be configured with 2 x 12” or 1 x 16” Outlet front Cap
- 42 US Gallon Environmental Spill Containment Fuel Tank Included (Oil/Diesel Version)
- Optional Heat Recovery System Available to Minimize Service Calls (Oil/Diesel Version)
- 3-Trials for Ignition (LP/NG Version)
- Ball-Valve Switchover from Propane to Natural Gas (LP/NG Version)
- 2.3” Static Pressure – Increased duct lengths & pressurization for larger structures (Model IDF500HS Only)
- GeniSys Controller with Diagnostic Reader (Oil/Diesel Version)
Available Options For Above Oil/Diesel Systems:
IDF350-II, IDF500 & IDF500HS -- Heat Recovery System (Installed) .. Add: $511.00
IDF350-II, IDF500 & IDF500HS -- XLT 60 US Gallon DW Fuel Tank .. Add: $350.00
