Thermal Care Accuchiller EQ2A03 3.0 Ton Air-Cooled Portable Chiller
Accuchiller EQ Series Portable Industrial Chillers feature a compact footprint with an easily accessible interior and a controller that provides precise temperature control and extensive diagnostics. Air-cooled, water-cooled and remote condenser models are packed with many standard innovative features that improve chiller performance and reliability.
Direct-Drive Scroll Compressors
Direct drive hermetically sealed scroll compressors with
proven performance in industrial cooling for reliable, low
maintenance, and efficient operation.
Stainless Steel Evaporators
High-efficiency stainless steel plates with copper brazing
provide maximum performance, long life, and an enhanced
level of corrosion protection for harsh process conditions.
Stainless Steel Pump
Stainless steel pump selected for peak performance with
the utmost in corrosion protection to ensure a long useful
life under severe industrial conditions.
Nonferrous Reservoir and Water Lines
The insulated reservoir, fluid lines, pumps, and other
components in the process fluid circuit will remain free of
rust to provide maximum corrosion protection.
Evaporator Inlet Strainer
The evaporator inlet strainer removes any debris present in
the process fluid to prevent costly downtime and repair
due to a clogged chiller evaporator.
Compressor Protection Technology
Our compressor protection technology uses start-to-start
anti-recycle control logic to limit cycling under low-load
operating conditions to extend compressor life.
Temperature Deviation Warnings and Alarms
A warning alerts the operator of a potential problem
before a fault occurs and if the condition gets worse, an
alarm stops the chiller to prevent damage.
Deviation Alarm Time Delays
Provides an adjustable alarm time delay to deactivate the
alarms long enough for the process loop to stabilize
before the alarms are active.
• Larger pumps
• Alarm horn
• Automatic make-up
• Rotary non-fused disconnect switch
• Branch circuit fusing
• C-UL508A industrial control panel
• Modbus TCP/IP communications
• High temperature set point (up to 80°F)
• Reservoir low level alarm
• Main power phase monitor and alarm
• Return fluid temperature display
EQ Series Options & Cost:
3-phase monitor $260
Alarm horn $165
Automatic water make-up valve (installed at the factory at the time of unit production) $395
Branch circuit fusing (included in C-UL508A option) $275
C-UL508A control panel (adds branch circuit fusing and other components needed to meet C-UL508A standards) $515
Extended setpoint range (adds CPR valve to extend maximum set point from 65°F to 80°F) $250
Modus TCP/IP communications (in place of standard Modbus RTU) $335
Remote controller with 50 foot cable (second control interface for remote mounting) $365
Remote setpoint (0 to 10VDC or 4 to 20 mA) $200
Reservoir low level alarm $210
Return water temperature display $85
Rotary non-fused disconnect $330
Special color air-dry enamel paint $1,185
Ship Loose Options:
Part #9638518 Automatic water make-up retrofit kit $395
Part #9638326 Return piping kit $395